• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they don't corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, which can make it very dangerous and potentially fatal. It is essential to take the time to make sure that you're doing all you can to keep your windows in good repair.

Single-pane windows are relatively easy to replace, and they will usually fit into the old frames very easily. However If windows with double panes are held in place by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this instance, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you plan to try to remove the window panes by yourself it is important to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you begin working on the glass, so that any shards will fall onto the fabric instead of landing on the floor where they can be trodden under and cause further damage.

It's a great idea to cover the gap with tape after the glass is removed. This will stop drafts and water from entering your home until a professional comes out to repair the window. This also serves as an obstruction to prevent criminals from getting into your home. If the distance between the door and the window is substantial, you may need to consider a security screen that also includes an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could be affected by a variety of issues that include sagging. A sagging upvc window repair windows can cause problems with light, draughts and even security. It is crucial to act when you notice your uPVC windows are sagging.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows so you can get at the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and check for an appropriate fit. If you are happy with the size of the window, tighten the screws to hold them in place.

If you are unable to reposition the hinges you may require replacing the seal. Over time rubber seals can lose their elasticity and dry out and cause their tightness to decrease. It is essential to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also loosen. Most often, this is caused by screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need to close the window and perform a test fit. The corner joints of the sash need to align with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into its original position.

3. Water Leaks

It is essential to take action if wake up every morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who is competent. Depending on the severity of the problem the old caulking may require removal before a new layer can be put on. It is important to keep in mind that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area harder to clean and could reduce your energy efficiency.

Make sure that the drainage holes are free of debris in them and ensure that the sill pan has been angled correctly to drain away from the window. In more severe cases, you may need to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to keep in mind that if the leakage originates from the glass of your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or it blows open with a breeze. They can be easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like any mechanical component hinges will be damaged over time. It is an easy process but it can be simpler when you have a person to assist in holding the frame in place.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused by opening the window improperly or due to a poor installation in the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be happy to give you suggestions.

It is also important to lubricate the hinges regularly. Applying a light engineering lubricant on the hinges is a great way to do this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It also helps prevent corrosion and reduce the possibility of sticking. This should be done at least every year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. Firstly the hinges, again due to wear and tear can become misaligned, this will cause gaps to develop between the sash and the frame. If they're beyond repair, it might be necessary to have them realigned. The second is the interlock, which is located on the hinge of the window, can also be misaligned, and again it may be feasible to give them a clean but in certain cases, it may be necessary to get them replaced.

The seals may wear out or get damaged over time, allowing air to escape. Installing high-quality weatherstripping will help to stop draughts. Another option is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will reduce draughts.

The last way to reduce the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be placed over your window sill. They can keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs your windows made of upvc window repairs will continue to provide an excellent level of security and insulation for your home. It is crucial to recognise that all windows have a lifespan and eventually, they will reach the point when it's more economical to replace them than repair them. If you encounter any issues with your window made of upvc you should consult a professional immediately.