• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it very hazardous and possibly fatal. You should take the time to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace and typically fit into old frames very easily. If you have double-paned windows that are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance you'll need source some plastic spacers that assist the new pane to fit perfectly into the frame of the window.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass by yourself. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric and not onto the floor and could be trampled.

Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to block water and drafts from getting into the home until a professional can come out and repair the window. This will also provide an obstacle to stop intruders from making their way into your home. If the gap is particularly large, you may want to consider using a security door that has an integrated window, as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may be affected by a variety of issues that include sagging. A sagging uPVC window can cause problems with light, draughts, and even security. It's crucial to act as soon as you realize that your uPVC windows are sliding.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll need to open the window to access the frame. Then, using an screwdriver, unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you're satisfied with the size of the window, tighten the screws to hold them in the right position.

If you are unable to reposition the hinges, you may require replacing the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to loosen. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is often caused by screws that have become undone over time, but it could be due to the mechanism of the handle getting worn out. It's relatively simple to fix a loose uPVC handle. You'll first need to close the window and then perform an initial fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it is important that you take action. Water leaks from windows are not just a cause for destruction of your home's structure but also hamper your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be done by any DIYer who is competent. Based on the severity of the issue the caulking that was used up may need to be removed before a new layer of caulk is applied. It is important to remember that when it comes to upvc window repair window repairs, do not be tempted to apply too much caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes are free of debris in them and that the sill pan has been properly angled to drain away from the window. In more serious instances, you may need to think about replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and is able to quickly spread throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is more with the seal rather than the frame. This can be easily repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open in a breeze it could be hinges that are at the fault. They can be repaired by any skilled DIYer and are usually completed in just a few minutes.

Like all mechanical parts hinges will wear out over time. It's easy to replace a hinge on a window repairs near me however it is easier if someone else helps you hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The problem can be caused due to opening the window in the wrong way or due to a poor installation in the factory. Sending us a photo via our website will often solve the issue. We are happy to give advice.

Regularly lubricating the hinges is essential. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. This should be done at least once a year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few different things. Firstly the hinges, again due to wear and tear can become misaligned, this can cause an opening to appear where the sash joins the frame. If they are damaged beyond repair, it may be necessary to get them re-aligned. The interlock, which is located on the hinge of the window and can be misaligned. Again, it is feasible to give them a clean but in certain cases, it may be necessary to get them replaced.

The second most frequent reason for draughts are the window seals. These can become worn down or damaged over time, and will allow air to escape through these gaps. Installing high-quality weatherstripping will help to keep draughts at bay. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures, and also lessen the possibility of draughts.

The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. These will help to keep cold air out and keep your home warm and cozy!

With a bit of regular maintenance and repair your windows made of upvc will continue to provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows eventually get worn out and it may be cheaper to replace them than to repair them. If you encounter any issues with your upvc Window repair window it is recommended to speak with a professional as soon as possible.