• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It's easy to replace a broken window handle using the appropriate tools. It is important to know your type of handle and its spindle length before buying the replacement.

Older uPVC window handles have a spur which extends and is locked over a cockspur wedge striker. They can be right-handed or left-handed, and must match when replaced.

What kind of lock or handle do you have? I have

There are a variety of windows locks and handles made of upvc each with its particular advantages and uses. The type of handle that you choose will determine whether or not your locking mechanism is effective and if it's easy to open windows. With time and regular use, the upvc handles on your windows glass replacement could be damaged and worn out. This makes them less secure and less effective. In certain instances, they might even fall off completely. It is important to repair the handles on your window made of upvc immediately if you see they are falling off. This will help to stop potential burglaries and ensure your home is secure.

It's an easy task that anyone can complete. You'll need a few tools, but with the right knowledge, it is a straightforward process that should only take a few minutes. It is important to be aware of the type of lock or handle you have on your window. This will allow you to choose the right replacement.

Inline Espagnolette Handles

These are the most common type of upvc handle and are usually located on the other side of your window. They are flat and have an opening that engages the locking mechanism of the window frame. Inline upvc handles feature a spindle running through the middle of the handle and into the window frame to control the latch.

Cockspur Handles

These handles are usually found on older uPVC window frames and feature distinct hook-shaped designs. Cockspur handles have one screw that secures the handle to the frame and aren't as secure as other kinds of window handles.

Handles that can tilt and turn

In contrast to other handles made of upvc the tilt and turn handles can both be rotated to open the window and the handle can be tilted to the side for ventilation. They typically have a 7mm spindle at the side of the handle. They are available in both left and right handed versions.

When you are purchasing replacement handles for upvc it is essential to verify the length of the spindle because not all handles are identical in size. To determine the length of your handle made of upvc, simply drop something into the middle of the hole and then measure how far down it goes before meeting an obstruction. This is the longest spindle length that will fit your window.

What is the spindle?

uPVC window handles operate in a similar way as doors. By turning the handle, you can activate a latch inside the frame. This unlocks the window so that it can be opened and closed. The handles could be damaged, particularly if they're used frequently or exposed to harsh conditions. This can leave you needing to replace your uPVC windows handles as they may not operate the window correctly in the future.

There are several different types of uPVC handles to choose from, comprising Espag, Cockspur and Spaded handle options. They are designed to fit in the uPVC frames in a variety of ways, and each type of handle utilizes a specific spindle to secure the mechanism into the window. This is why it is important to know what kind of handle is installed on your uPVC window so you can get the correct replacement for it.

The base section of the handle will inform the type of uPVC it is. There should be a "snap-in' cover over one screw that holds the handle base in place. Take it off and you should be able to see the second screw at the opposite end of the base portion of the handle. Once both screws have been removed then you should be able to take the handle out of the uPVC.

Once you have removed the uPVC window handle, you have to carefully remove the spindle you have removed from the locking mechanism. Make note of the length of the spindle since you will need to ensure that you purchase one that is the same length as the original handle and locking mechanism.

The most common issue with window handles made of uPVC is that the spindle becomes worn out and cannot longer function properly with the locking mechanism. This could be due to corrosion, damage due to constant use or an unreliable locking mechanism. If this occurs, it is necessary to replace the window handle and locking mechanism to restore complete functionality to your uPVC windows.

How do I remove the old handle?

In the course of time and daily use, window handles can become damaged or broken and if this happens, it is essential to fix them as soon as you can to ensure the safety of your home. It is good to know that replacing a worn or damaged handle is a relatively easy task that can be accomplished in less than a minute and doesn't require any specialist tools.

The first step to remove the old handle is to remove the screw located at the top of the handle base. Once the screw has been removed, the handle will be removed. Another screw will be located at the bottom of the handle. This too can be removed. After these two screws have been removed, the handle can be removed from the window's base.

Once the old handle has been removed, grab the new handle and align the fixing holes with the holes currently in the window frame. There may be a little sticker or caps on the new handle, so take off these if necessary and then screw the handle into the frame. Once the handle is in place, it is crucial to verify that it is working by turning the handle, and ensuring that the lock mechanism is activated.

Espag handles have a spindle that protrudes from the handle and slots into a multipoint locking mechanism in the window frame. Cadenza windows come with a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and are hung over the frame of the window or the transom crossmember of the bar.

Once you have the new handle in place, slide the spindle into the window lock and then tighten it. Replace the snap-in cover and screw cap (if applicable) after the handle is fixed. Now that the handle is in use, open and close the window a few times to make sure it is working correctly and securely.

How do I install the new handle?

The process of changing your window handle made of uPVC isn't difficult, and the process is quite simple. All you require is a screwdriver and small amount of patience. The first thing you need to do is to ensure that the handle is not locked and then remove any screws that are visible. you can replace them with screw caps if needed. Once the handle is removed and you are ready to take a note of the length of the spindle which protrudes from the back of the handle. This is crucial as it will determine what kind of handle you will need to buy.

Espagnolette handles on uPVC are the most well-known type of handle. They have a spindle that runs through the handle, and is responsible for a locking mechanism within the window frame. Once the handle is turned it opens the latch on the window, allowing it to open. With time and regular use, espagnolette handles could become damaged or impaired which is why it is essential to find replacements.

Cadenza handles are another type of uPVC window handle, which is typically used on tilt and turn windows. They have a protruding knife that is operated by a multi-point locking mechanism within the window. They are usually more secure than espagnolette handles since they are only accessible from the inside. You can replace them with the same method as you would with espagnolette handles however, make sure that the new handle is angled, not flat.

Once you have selected the correct handle, simply align the new handle with existing screw holes prior to fixing it with screws. You should then put the screw covers back on and make sure the new handle is working properly. You can accomplish this by moving the handle back and forth from the locked position to the unlocked one a few time. It might be worthwhile to speak with an expert to see if you can resolve any issues. They can offer advice on how to fix the problem in a timely and efficient manner.