• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

Replacing a damaged or broken window handle is a relatively easy task and with the right tools it can be done quite quickly. It is important to know the type of handle you have and the spindle's size before purchasing the replacement.

Older uPVC window handles have a spur which protrudes and locks over the wedge striker for cockspur. They can be left- or right-handed, and must be matched when replacing.

What type of lock and handle do I have?

There are a myriad of upvc window locks and handles, each with its own advantages and purposes. The type of handle you have will determine the ease to open your windows and if the locking mechanism works as intended. With time and regular use the upvc handles that are on your windows could be damaged and worn out. This makes them less secure and effective. In some instances, they could even fall completely off. It is important to repair your upvc window handles as soon as you begin to notice they are falling off. This will stop possible burglaries and will keep your home safe.

It is a good thing that replacing your upvc window handles is a simple task that is achievable by almost everyone. You will need a few tools, but with proper knowledge, it's simple and should take only a couple of minutes. To begin you must identify the type of handle and lock you have on your window and then to find the ideal replacement windows cost.

Inline Espagnolette Handles

These are the most common type of upvc handles and are usually placed on the outside of your window. They are flat and have an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles also come with a spindle that goes through the middle of the handle and then into the frame of the window to operate the latch.

Cockspur Handles

They are usually found on older uPVC windows and feature distinct hook-shaped designs. Cockspur handles are fitted with a single screw that secures the handle to the frame and are not as secure as other kinds of window handles.

Tilt and Turn Handles

As opposed to the other handles made of upvc that are tilt and turn, these handles can be rotated to open the windows and tilted inwards to allow ventilation. They have a 7mm spindle at the back and are available both in right-hand and left-hand versions.

It is crucial to determine the spindle size when buying replacement handles made of upvc. Not all are the exact same size. To determine the length of your upvc handle simply drop something in the middle of the hole and measure the distance it travels before it reaches an obstruction. This is the largest spindle size that will fit in your windows.

What is the spindle?

uPVC window handles work similarly as doors. By turning the handle, you will be able to open a latch in the frame. The window is then opened and closed. The handles can become damaged, particularly if they're frequently used or exposed to harsh environments. You may need to replace the handles on your uPVC window if they're not operating correctly.

There are many different types of uPVC handle options, such as Espag, Cockspur, and Spaded handles. They are designed to fit inside the uPVC frames in different ways, and each type of handle utilizes a specific spindle to lock the mechanism to the window. This is why it is important to know what type of handle you have on your uPVC window so you can find the right replacement for it.

You can find out what kind of uPVC handle you are using by taking a look at the base of your handle. A snap-in cover should be over the screw that holds the base of the handle in position. When you remove this cover you will be able to see the screw that holds the base of the handle in position. After both screws are removed, you should be able take the handle out of the uPVC.

Once you have removed the uPVC window handle, you will need to remove the spindle you have removed from the locking mechanism. Take note of the length of the spindle. You'll need to buy a replacement windows near me of the same length as the handle that was originally used and the locking device.

The spindle wears down and cannot operate the locking mechanism. This could be due damage caused by constant use, a loosening of the locking mechanism, or even corrosion over time. When this happens it is necessary to replace the window handle and locking mechanism to restore the full functionality to your uPVC windows.

How do I remove the old handle?

Window handles can become damaged or even broken over the course of time. It is crucial to fix them as quickly as you can to ensure your safety. It is simple to replace a damaged or worn handle. The job can be completed in under one minute without the need for special tools.

To remove the handle, first remove the screw at the base of the handle. Once this is removed the handle can then be removed from the base. A second screw is located at the base of the handle. It can also be removed. Once these two screws are removed, the handle will be removed from the window's base.

After removing the handle and align the fixing holes of the new handle to the holes that are already in the window frame. There may be a tiny sticker or caps on the new handle, so take off the caps if needed, and then screw the handle in the frame. Once the handle is set, it is important to test that it is working by turning the handle and ensuring that the lock mechanism activates.

Espag handles have an extra spindle that is protruding from the handle and slot into a multipoint locking mechanism within the window frame. Cadenza windows come with a blade with cut-outs that slot into the lock mechanism while Cockspur handles have a long nose that is able to hook over either the frame's outer or transom bar cross member in the window.

Once you have the new handle in place, insert the spindle inside the lock inside the window and then tighten it. Replace the snap-in cover and screw cap (if appropriate) once the handle has been firmly fixed. Once the handle is in use, open and close the window a couple of times to make sure that it functions correctly and securely.

How do I fit the new handle?

It's not difficult to alter the handle on your windows made of uPVC. The process is simple. You'll need a screwdriver and a bit of patience. The first thing you need to do is make sure that the handle you have previously used is in the unlocked position and then remove any screws that are visible, you can replace them with screw caps if needed. After you have removed the handle, you'll need to take note of the length of spindle that extends from the back. This is important as it will determine the type of handle that you will need to buy.

Espagnolette handles are the most commonly used kind of handle that is used on uPVC windows. The spindle passes through the handle to activate the locking mechanism inside the window frame. The handle releases the latch, allowing the window to open. During regular use and time, handles for espagnolette may be damaged.

Cadenza handles are a form of uPVC handle that is typically used with tilt and turn windows. They feature a protruding knife that operates a multiple-point locking mechanism inside the window. They are generally more secure than espagnolette handles since they can only be opened from the inside. They can be replaced by the same procedure as espagnolette handles but you should make sure that the new handle has an angled blade instead of one that is flat.

Once you have selected the correct handle, simply align the new handle to existing screw holes before screwing it in place. After that, you should put the screws back on and make sure the new handle is working correctly. You can perform this by dragging the handle between the locked position to the unlocked several times. It is possible to contact an expert to see whether you can solve any problems. They can often advise you on the best solution to solve the issue in a speedy and efficient way.