• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Repairs

Window repairs can save homeowners money and make their homes warm. Window replacement may be necessary in the event of severe damage such as broken glass, or a window frame that has been smashed.

But there are many other issues that can be fixed to prolong the lifespan of your windows. Common issues include:

Cracked or Broken Panes

Glass that is cracked can be caused by a lawnmowers that throws errant rocks or by branches of trees being blown by strong winds. This not only looks terrible, but it could also lead to higher energy bills because broken glass lets cold air into your home. It's fairly simple to repair windows with broken panes.

Begin by carefully removing glass using gloves and safety glasses. You may have to employ a utility knife to break loose any remaining putty or old glazing compound around the edges of the frame. Next, use a soft paper towel or cloth to clean the surface of the glass and the frame's wood.

Once the area is clean, apply a waterproof silicone caulking on the frame's perimeter. This will stop water from leaking into the frame through the crack and result in further damage.

A crack that is severe in double-paned glass could compromise the gas between the panes, which can make your windows less insulative. If the crack is severe enough to threaten the quality of the glass or if you have an inner pane that's completely missing, it might be time to call in an expert.

Thermal stress cracks may also occur when there is an extreme temperature difference between your home and the outside. The glass is then able to expand and contract. If the cracks are on two sides of a window, it is best to replace it rather than attempt to repair it.

Clear tape can be used to fill cracks in windows that are not yet ready to be replaced. It also keeps out cold winds and bugs. You can even cut an area of nylon stocking or tarp sufficient to cover the crack and stick it to the wall using duct tape. This isn't a permanent solution however it's a great solution in a pinch and keeps cold air and insects out of your home. If your windows are older and you're beginning to see cracks in the glass It's an excellent idea to talk with your local window manufacturer about whether replacing the entire window might be the best solution for you.

Rotten Wood

Wood rot is one of the most common problems with windows. It can ruin a house's appearance and create a security risk. It is possible to repair the wood that has rotted. The first step is to make sure that the source of the rot has been addressed. This can be done by checking for leaks in the roof, missing gutters cracking caulking, and any other areas which allow water to penetrate the wood.

You will then need to take out the rotten components of the window frame. This can be done using a claw hammer, chisel or a rasp. After the rotten areas have been eliminated it is time to replace them with fresh wood. Pre-treated wood is recommended for this project, as it will resist the onset of rot. If you are unable to replace the wood that has been damaged then you can use wood filler or hardener to strengthen the damaged area. This type of product will be found in a lot of hardware stores. To get the best results, adhere to the instructions on the product label.

After you have repaired the damaged areas of the window sill, it's crucial to protect the area. This can be done by applying a waterproof wood sealant. A product such as Sikkens is a great choice for this job.

Use a two-part epoxy in order to protect the wood from further damage. It is easy to apply and leaves a nice finish. However, it is very important that you follow the directions for application on the label. Once the epoxy filler has dried, you can sand the surface of the wood. Start with a rough sandpaper then move on to an easier grade.

You do not want to expose the rotted part to more moisture. It is a good idea therefore, to cover the repaired surface with an oil-based prime which will shield it from water. Then, you can apply the waterproof wood sealant.

Won't Open

There are a variety of reasons windows won't open. Wood frames can warp in rainy weather, or the house might have sunk or someone could have closed it to protect themselves. But with some patience and the right tools, most windows that are stuck can be opened.

One of the most common reasons for windows that won't open is accumulated gunk or debris on its moving parts. Acme Glass notes that dirt and grime accumulates over time on the sliding tracks, hinges, and locks. Additionally, hardware made of metal can rust when it comes into contact with humidity and direct sunlight. Spray grease on these areas can aid in preventing oxidation and keep your windows functioning correctly.

Stuck windows may be the result of a loosening or breakage of the pulleys used to lift and lower the window. These components can lose their tension and get blocked, especially when the window is situated at least two stories above the ground.

If you're having difficulty opening the window Try using a pry bar to gently force the window to open just a little at a time. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to scratch the wood or the window repair near me. Alternately, you can run a hair dryer around the edges of the frame for a few minutes to warm the wood and help it to move more easily.

A broken spring could be the cause of a window that won't raise or lower. You'll need to refer to your owner's guide for more details depending on the person who made your windows.

If you've tried cleaning and lubricating the moving parts on your windows, but they still cannot open, it may be time to replace windows. Homespire Windows & Doors provides energy-efficient replacement windows. Don't let your windows go from functional to unusable, as windows that aren't properly shut could expose your home to water damage and burglary. Contact our team to learn more about our windows replacement and services today!