• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Repairs

Window repairs can help homeowners save money and ensure their comfort. In the event of severe damage, such as broken glass or a shattered frame, window replacement may be required.

But there are many other issues that can be addressed to extend the lifespan of your windows. Common issues include:

Broken or cracked Panes

Cracked window glass can be caused by a lawnmowers that throws rocks in the wrong direction or the blow of a tree branch by strong winds. It's not just visually terrible, but it could result in more energy costs because the broken pieces let cold air in to your home. It's fairly easy to fix windows that have broken panes.

Start by carefully removing the glass using gloves and window repairs safety glasses. You may need to make use of a utility knife in order to remove any remaining putty or old glazing compound that has accumulated around the edges of the frame. Then, use a soft paper towel or cloth to clean the glass's surface and wood of the frame.

After cleaning the area, apply a silicone caulking that is waterproof around the frame's perimeter. This will prevent water from leaking into the frame through the crack and causing further damage.

If you have double-pane glass cracks that are severe could damage the gas layer between the panes and render your windows less insulative. If the crack is serious enough to compromise the integrity of the glass or if you have an inner pane that's completely missing, it's the time to call an expert.

Cracks in thermal stress can occur when there's an extreme difference in temperatures between the outside and inside of your home, which causes the glass to expand or contract. If the cracks are situated on two sides of a glass, it is best to replace it rather than try to repair it.

Clear tape can be used to close cracks in windows that aren't yet ready to be replaced. It will also keep out bugs and cold wind. You can cut a nylon stocking large enough to cover the entire crack and glue it with duct tape. This isn't a permanent solution however it can be useful in a pinch and keeps insects and cold air out of your home. If you notice cracks on your windows that are older it is recommended to contact your local business to determine if replacing the whole window is a better solution.

Rotten Wood

Wood rot is a typical problem with windows. It can damage a home's appearance and pose a safety hazard. It is possible to fix rotted wood. You will first need to determine the root of the wood's rot. Examine for leaks in the roof and other areas that water may get into the wood.

Next, you will need to remove any rotten areas of the window frame. This can be done with an axe, a claw hammer or a rasp. After the areas that are rotten have been eliminated it is time to replace them with fresh wood. It is recommended that you use pre-treated wood for this project as it is more resistant to rot. If you are not able to replace the wood damaged by rot You can try using wood filler or hardener to repair the damaged area. Many hardware stores will carry this type of product. Follow the directions on the label of the product to achieve the most efficient results.

After you have repaired the damaged areas of the window sill, it's important that you protect the area. This can be done by applying a water-resistant wood sealant. Sikkens for instance, is a great product to apply.

You can also use a two-part epoxy filler to protect the wood from further damage. It is easy to apply and gives a good finish. However, it's important to follow the application instructions on the label. Once the epoxy filler has dried, you are able to sand the surface of the wood. Start with a rough sandpaper, and then move on to a smoother grade.

The last thing you would like to do is make the area that is rotting even more by exposed to more water. So, it's a good idea to cover the area that has been repaired with an oil-based primer that will shield it from moisture. After that, you are able to apply the waterproof wood sealant.

The W won't open

A window that won't open could be due to a variety of reasons. Wood frames can warp during wet weather, the house could have settled or someone may have closed it for security reasons. With a bit of patience and the right tools, you can open the majority of stuck windows.

Gunk or debris that has accumulated can be a major reason of a window not opening. Acme Glass notes that dirt and grime accumulates over time on the sliding tracks, hinges and locks. In addition, metal hardware may be rusty when it comes in contact with humidity or window repairs direct sunlight. Keeping these areas lubricated with spray grease can help to prevent the oxidation process and ensure that your window is working correctly.

The pulleys used to raise or lower the window can become loose, or even break. These parts can be weakened and obstructed when they are placed at least two floors higher than the ground.

If you are having trouble opening a window, try using a pry bar to gently force the window to open a bit at each time. Place a block on the frame of the window to give the pry bar more leverage. Be careful not to damage either the wood or the window. Try using a hairdryer to dry the frame's edges for several minutes. This will warm the wood, making it easier to move.

Another common problem with windows that don't open is a defective spring that prevents the window jamb from lowering or rising. You'll need to check your owner's guide for more details depending on the person who made your windows.

If you've tried cleaning and lubricating the moving parts of your windows, but they still cannot open, it may be time to replace windows. Homespire Windows & Doors offers energy-efficient replacement windows. Don't let your windows go from functional to inoperable since a window that isn't properly shut can expose your home to water damage and burglary. Contact our team today for more information on our replacement windows as well as our services!