• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft with the Ghost Immobiliser. This system is discrete and doesn't require additional key fobs.

The device uses existing buttons on your vehicle (steering wheel, door panels & centre console) to create a unique, changeable pin code sequence that can be up to 20 presses long. This will allow your vehicle to start.

Simple process to change the PIN code

Many homeowners are upgrading their security due to the rising number of vehicle thefts. There are many kinds of aftermarket security devices including tracking systems, alarms and immobilisers. However, not all of these are equally efficient in protecting your vehicle. While a tracking system can help you find your car in the case of theft, it does not prevent the crime from happening in the first in the first place. Immobilisers, on the contrary are exactly what they say on the tin: they shut down the motor of your car so that it isn't able to be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it nearly impossible for thieves to take your car.

Utilizing the buttons already in your car The ghost immobiliser problems - one-time offer, device is able to create an exclusive sequence that has to be entered before the engine starts. This can be done using the heater, window or indicator stalk buttons. In addition to this, there is also an app for mobile devices that can act as an emergency PIN code override, allowing the driver to operate the car without the button sequence. This is especially useful if you need to give your car away for valet parking or maintenance, as the immobiliser is activated, but not disabled.

The Ghost is an innovative and unique device that works with the buttons of your vehicle instead of as a separate unit. It is not only an effective deterrent for vehicle theft however, it can also be used on any future vehicles you may own. This makes it a more cost-effective option than a traditional wheel lock.

Small, weatherproof device

The Autowatch ghost immobiliser is a high-tech security system that protects your pride and joy against key cloning, hacking & ECU swapping. It is a weatherproof tiny device that connects directly to your vehicle's ECU via the CAN data bus, which disables the engine. It can be plugged into the vehicle without additional wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also immune to jamming devices that are a popular technique that car thieves use to get around immobilisers.

The benefit of using CAN data is that it operates in a silent manner in comparison to conventional systems. It cannot be detected using sophisticated RF scanning and code-grabbing technologies and cannot be recognized by conventional diagnostic tools. The Autowatch Ghost does not use LED indicators and instead uses buttons in your vehicle, such as the steering wheel, centre console, or doors, to create an unique sequence of disarming. This sequence can be extended to 20 or more presses to provide additional security. The iPhone app allows a single, authorised connection with the pairing code unique to the Ghost and the communication between the two devices is encrypted.

The Ghost also prevents car thieves from using the key to a new car or replacing the ECU to bypass the immobiliser and begin the engine. It will only allow the engine to start only if the correct pin code is entered. It can also be put into valet/service mode for a temporary operation (with specified parameters, such as a 30mph speed limit) so that you can transfer your vehicle to a valet service or for servicing without the need to enter a PIN code.

Each vehicle is tested

The Autowatch auto ghost immobiliser is a first-of-its-kind aftermarket CANbus immobiliser. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device detects signals to prevent your car from starting up normally until you enter a customized code. The system can be activated or deactivated by using your smartphone app, without the need for extra wires.

The standard factory immobilisers function with a transponder which is built into the key. This transmits a signal to the ECU. The car will begin to start if the correct code is sent. If, however, the transponder of a different vehicle is used instead, the immobiliser doesn't recognise it. This makes it possible for the vehicle to be stolen and then started. A South African company that is at the forefront of vehicle safety systems technology developed the Ghost immobiliser. It shields you from hacking or key cloning, and even key theft. The only way that a burglar could take your car is by physically towing it away and even then, they wouldn't be capable of driving it.

Ghost makes use of the buttons on your vehicle, including the indicator stalk as well as the steering wheel and door panels to generate an unique PIN sequence that can be changed that must be entered before you are able to use your car. This is done without extra hardware, such as a keyfob. It can take up to 20 presses. It is also inaccessible to diagnostic equipment and doesn't transmit radio frequency signals so thieves cannot utilize sophisticated RF scanning or code grabbing technology to discover that security systems have been installed.

Contrary to physical anti-theft devices such as clamps or wheel locks Ghost is concealed within the vehicle so it can't be disabled or removed by thieves. It is more difficult to remove from a car alarm which requires disarming with an action sequence. This makes it a great alternative to a GPS tracking device which can be used to locate your vehicle after it's been taken.

Emergency PIN code override

You don't have to look far on social media to see stories or even videos of vehicles that have been taken by thieves using the latest technology tools available to them. Key-cloning devices, for instance, and hacking tools that allow them to start the vehicle with the original keys.

The Ghost immobiliser was designed to combat this and provide you with an extra layer of security to protect your vehicle from being targeted by thieves. It creates a unique pin code when pushing the buttons on your steering wheel, door panel and the centre console. This unique PIN has to be entered along with your original key fob in order to prevent the vehicle from starting. The unique override pin is on the black card you will receive after installation. It is simple to remember because there are no LED indicators.

The device is hidden within the vehicle's wiring and does not emit radio signals. Therefore, it cannot be detected by diagnostic software that can determine the type of security system you have installed. This makes it a great alternative to the tracking device.

Unlike other security systems, which use a relay in engine bays, immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to disable the vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect a separate analogue immobiliser, alarm or tracker with these systems, but this has to be specified before installing the device. They are also fully service/valet-mode compatible and a great alternative to a tracker you have your car checked for repairs to an electrical issue at the dealer.

Service/Valet mode

In recent years there has been a rise in the number of vehicles being stolen without the owners keys. It is more easy than ever to take your joy and pride due to the availability of key cloning devices and door lock picks. To stop this, we now offer the Autowatch ghost immobiliser near me immobiliser that prevents your car from being driven even if your keys were cloned or your car has been hijacked.

It communicates directly with your car's ECU (Engine Control Unit), via the data loop called CAN. It is completely silent, since it doesn't use radio frequencies or key fobs. It cannot be detected using diagnostics or any other hacking device. It also protects you from introducing an ECU or key to circumvent the system, since only the PIN code allows the engine to be started.

The device is hidden inside your car and can be accessible via buttons on your steering wheel, center console, Ghost Immobiliser Problems and door panels. Before you can start your vehicle, you must enter a unique and changeable PIN code that can be as long as 20 numbers.

This is the first aftermarket immobiliser for CAN bus to be designed to stop your car being driven away or started in the event that a PIN code hasn't been entered prior to. If the device is in armed and you try to drive away, it will display an indicator on your dash, which will flash regularly for around 300m. If you enter your PIN code during this time, it will disable the anti-hijack and your car will continue to drive in the normal way. If you do not enter your PIN at this point the indicator will continue to flash and require a new PIN every time you try to start your vehicle.