• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing uPVC Replacement Window Handles

The majority of customers agree that replacement handles made of upvc are easy to install and feel good. It's crucial to understand that the handle you choose for your window should be suitable for the window.

The key factor is the step height, which refers to the gap beneath the nose of the handle to the base or frame. Other factors to consider are lockable styles and mechanisms.

Replacement parts

There are a wide range of replacement double glazed window window handles made of upvc available for purchase. They come in many different colours and styles so there's sure to be something to suit your windows. It's easy to impulse buy, particularly when the handle is damaged, therefore it's a good idea to be patient and examine some things before you commit to purchasing a new one. First, you need to be aware of the kind of handles made from upvc you have and what the differences are between them. The table below lists the most common handles so that you can select the best one to match your window.

Most double-glazed windows today come with handles for epag. They are usually fitted to the frame using two screws that are screwed in from above and below.

They have a spindle bar on the back, which can come in a variety of sizes. This will determine the way they operate (either left or right handed). It's important to take the measurements of the handle you currently have to ensure that you order the correct replacement.

The arm is secured to the frame using two bolts, much like the Espag handle. However, fitted the arm is curved at a low angle to ensure that it doesn't scratch your blinds. This is a great choice if you want the handle to blend in with your blinds and have windows made of upvc.

Cockspur handles are similar to Espag handles, however they have a nose which closes over a wedge that rests on the window frame. This type of handle can be found on older wooden and Upvc windows.

On casement windows tilt and turn handles can be operated by turning the handle or pressing on the top of window. This lets you open the window from inside and clean it from outside without having to climb a ladder or step across the fence. They're ideal for those who have mobility issues, and can improve security and access in the home.

Tips and suggestions and

Many people will need to replace their uPVC window handles at some point. It is important to know a few tips and tricks that will make the job easier.

The first thing you should do is check what type of handle you have at home. Based on the type of handle it is attached to and which locking mechanism it uses it could be necessary to replace the entire handle and lock. If the roller cams or shoot bolts (espags) are jammed, or seizing up, you'll need to replace them as well as the handle.

Thankfully, the majority uPVC handles adhere to industry standards and are very alike. This makes replacing them an simple process. The first step is to remove the screw covers from the handles, which are typically the pozi-drive screws. After these screws are removed, you are able to remove the handle.

It's a great idea keep track of how much the spindle protrudes from the base of your handle when you separate it. This will enable you to measure the spindle length for the replacement handle. Simply take note of the length the square peg sticks out of the bottom of handle.

This is particularly important for inline uPVC window handles since they are always straight and will only open from left or right, and they won't operate in the middle. It's a good idea if you're not sure of the kind of handle you have at your home to borrow a handle and check out how it works.

You can also determine the handedness of a uPVC window by watching how the handle rotates when it is in use. Handed handles will turn either clockwise or anti-clockwise. If you are unsure then ask someone to open the window using the handle and observe what happens.

Take a measurement of the spindle

It can be difficult to pick the correct replacement handle for your window because different handles do not come in the same size. It is important to accurately measure the spindle when fitting a new handle. This will ensure that the handle fits. There are many different types of uPVC handles that function in various ways. It is important to determine which one you have, and what locking mechanism you are using.

Espag handles come with a spindle that extends from the rear of the handle and goes into the lock gearbox that is within the window frame. When you turn the handle, it is then a way to turn the lock in the gearbox to open the window. They are used on uPVC windows with casement. They can be locked with keys to provide additional security.

Cockspur handles are equipped with an "nose" which closes over the striker block in a wedge shape on the frame. They are commonly found on older double-glazed uPVC windows. They are also quite simple and they can be locked using keys. They can be a little more difficult to locate replacements for because they aren't as popular as the handles with a espagnolette.

If you own a tilt-and-turn uPVC and you require a replacement handle with a different locking mechanism. The handle can tilt the window and allow it to be turned back and forth to fully open it. You must choose an opening handle that has an opening of at least 55mm to be able reach the window frame.

The same method can be used to remove and replace the uPVC handle. However, you will have to be careful when you remove it. You may have to open the window a bit larger than normal to ensure that you can get to both screws fixing it to the frame. Once you have fitted your new uPVC handle and ensured that it is in the right position, you are able to tighten the screws and test the lock to confirm that it functions correctly.

Fit the new handle

When you have the proper replacement handle it is easy to screw into the right place. This will require a screwdriver, but may be easier with an electric one. It is important to not overtighten the screws while screwing them into. This could cause the handle or knob to become warped.

Inserting the spindle is the next important step to attach the new handle. The spindle is the part which runs through the handle to control the locking mechanism in the window. It is crucial that it is fitted correctly, as this will ensure the window can be shut and opened securely.

There are many different types of uPVC handles. They include:

Espagnolette Handles are handles inline which can be used to open tilt windows and turn them.

Cranked Espagnolette Handles - these are similar to the inline handle however they have a curved design that is ideal for windows in difficult-to-access locations.

Tilt and Turn Handles these are used on tilt and turn windows to operate the closing and opening mechanisms.

The majority of uPVC window frames are fitted with these. They are often called 'Bay windows in the UK.

It can be very frustrating when your uPVC handle fails. There is no need to replace the entire uPVC windows because of a damaged window handle. There are many easy ways to fix and replace a damaged uPVC window handle.

By identifying the kind of window you have, calculating the spindle length and purchasing a replacement handle you can quickly fix the broken window handle. It is crucial to be patient and ensure safety when working with windows and tools, however, this is a straightforward task. It could be the difference between having a secure and secure home or a window that can be easily opened. Bridgewater Glass is the place to go if you have questions or want to speak with an expert about replacing your window handle. We have a team of experienced and knowledgeable professionals who are able to assist with any issues you might be having.