• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as aluminum or timber.

It is important to clean and oil UPVC windows and doors regularly. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and even be fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good condition.

For single pane windows it is fairly easy to replace windows, and the new one will generally fit within the old frame very easily. However, if windows with double panes are secured by internal beading it will be more difficult to remove the old panes and put in new ones. In this case, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass by yourself. You should also lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric and Window Repair not on the floor which could cause them to be trampled under.

After the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to block drafts and water from entering the property until a professional can come out and repair the window. This will also act as a barrier, deterring any intruders from gaining entry into your home. If the gap is large, you might be interested in an alarm door repair that comes with an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. However, over time they can suffer from a variety of issues like sagging. A sagging uPVC windows can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from getting worse.

To fix a sagging window you can try repositioning the hinges. To do this, you'll have to open the window so that you can get to the frame. Then, remove both the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and check for fitting. If you're satisfied with the fit, you can tighten the screws until they remain in position.

If you are unable to reposition the hinges, you may require replacing the seal. Rubber seals can dry out and lose their elasticity with time, leading them to loosen. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is often caused by screws that have become undone over time, but it can also be due to the handle mechanism wears out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need close the window and then perform a test fit. The corner joints of the sash should be aligned with the casing joint. If it isn't you can use a screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

It is important to take action if you wake up every morning to discover mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant around the frame is either damaged or is missing.

This is a fairly simple fix that can be completed by any skilled DIYer. Depending on how severe the problem is, the old caulking may have to be removed. When it comes to uPVC repair, it is important to avoid 'over-caulking'. This can make your window more difficult to clean and lower its energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. This can be easily fixed by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, Window repair or loose and blow open with ease it could be hinges that are at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical part hinges are prone to be damaged over time. It's very simple to replace a hinge on a window but it's much easier if someone else helps hold the frame.

Make sure that the uPVC hinges open and close in the correct direction. Check for the arrows on each hinge to determine the direction in which the window repair should be opened.

The issue could be caused either by opening the window incorrectly or by a poor installation at the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be happy to give you advice.

It is also crucial to ensure that the hinges are lubricated on a regular basis. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It can also lower the chance of windows getting stuck and stop corrosion. The ideal time to perform this every year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause an opening to appear where the sash meets the frame. If they are damaged beyond repair, it might be necessary to get them re-aligned. Second, the interlock can also become disaligned. This is located on the hinge's side and could require to be cleaned. In some cases, it may be necessary to replace the hinges.

These seals can wear down or get damaged over time, allowing air escape. Replacing these with high-quality weatherstripping can help keep draughts at bay. Another option is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and again will lessen draughts.

Lastly, one of the most effective ways to cut down on draughts is by using an draught excluder. These are usually fabric tubes that are filled with some type of filler. They can be placed on the top of your windowsill. They can keep your home warm by blocking out cold air.

With a little maintenance and repairs your windows made of upvc will provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows eventually become worn out, and it is more cost-effective to simply replace them instead of fixing them. So, if you're having issues with your upvc windows, it is best to seek professional assistance immediately.