• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not get rusty or decay.

It is essential to clean and oil UPVC doors and Upvc Window repairs windows regularly. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, making it very hazardous and possibly fatal. It is essential to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames of the past easily. However, if you have double-pane windows that are held in place by internal beading it will be more difficult to remove the existing panes and install new ones. In this situation you'll need to find some plastic spacers to aid the new pane in being able to fit properly into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards of glass fall onto the fabric, not onto the floor which could cause them to be trampled.

After the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from getting into the home until a professional is able to come out and repair the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap is large, you might think about the security door with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. As time passes, they may be affected by a variety of issues that include sliding. A sagging uPVC windows could cause issues with light, draughts and even security. It is crucial to act as soon as you discover that your uPVC windows are sliding.

To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you'll have to open the window so that you can get to the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the fit, tighten the screws to ensure that they remain in position.

If you are unable to reposition the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's crucial to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and secure from draughts.

upvc window repairs handles can also loosen. This is often caused by screws that have loosened over time, but it can be caused by the handle mechanism wears out. Fortunately, it's easy to fix a loose uPVC window handle yourself. First, you'll need to close the window and then perform an initial fitting. The corner joints of the sash should be aligned with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

It is essential to act if you wake up every morning to discover mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on how serious the problem is, the old caulking may need to be removed. It is essential to remember that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area harder to clean and can decrease the efficiency of your energy usage.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed window, it is more likely that the issue is with the seal rather than the frame. Again this can easily be fixed by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open, or if it opens in an ease. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like all mechanical parts hinges are prone to wear out over time. It is essentially a very simple procedure, but it is easier to do with someone else to assist in holding the frame in place.

Check that the uPVC hinges are open and closed in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused by opening the window improperly or a faulty installation in the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be more than happy to give you advice.

Regularly lubricating the hinges is also necessary. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. This must be done at a minimum every year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. First, the hinges due to wear and tear may become displaced, which causes a gap to form between the sash and the frame. They can be repaired by giving them good cleaning, but when they're beyond repair, it could be necessary to have them realigned or replaced. Secondly the interlock, this is located on the hinge side of the window and can also become misaligned, again it may be possible to just give them a good clean, but in some cases it might be necessary to have them replaced.

The second most frequent cause of draughts is the window seals. They are prone to wear or damaged over time, and allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures, and also reduce the risk of draughts.

Lastly, one of the most effective methods to reduce draughts is by using a draught excluder, these are typically made of fabric which are filled with a type of filler. They can be placed on top of your windowsill. They will keep your home warm by blocking out cold air.

Your windows made of upvc will remain a great source of insulation and security for your home with a little regular maintenance and repairs. However, it is important to realize that windows last for a certain period of time and they may reach the point when it's more economical to replace them than repair them. If you are experiencing problems with your upvc windows, it is always best to seek professional assistance as soon as possible.