• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home, and could even be fatal. You should take the time to make sure that your windows are in good shape.

Single-pane windows are relatively simple to replace, and they generally fit into old frames very easily. If you have double-paned windows that are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this situation, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric and not onto the floor which could cause them to be trampled.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop water and drafts from entering the home until a professional comes out and repair the window. It also acts as an obstruction to prevent criminals from getting into your home. If the gap is particularly large, you may think about an alarm door that comes with an integrated window as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows made of sash. As time passes, they may develop a number of problems such as sliding. A sagging window in uPVC can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from getting worse.

To fix a sagging window you can try to reposition the hinges. You'll first need to open the windows so you can reach the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you are happy with the fit of the window, tighten the screws to secure them in place.

If you are unable to move the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and secure from draughts.

uPVC handles may also loosen up. The majority of the time this is due to screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. Luckily, it's not difficult to repair the handle of a window repair that is loose yourself. First, you'll need to close the window and do an initial fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then return the mechanism to its original its original position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains it's important to take action. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a relatively easy fix that can be completed by any competent DIYer. Depending on the severity of the issue is, the old caulking might need to be removed. When it comes to uPVC repair, it is important to be careful not to over-caulk. This can make your window harder to clean and decrease its energy efficiency.

Make sure that the drainage holes are free of debris in them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more severe situations, you may have to replace the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can quickly spread across the house.

If the leakage occurs between the double-glazed window, it is more likely the problem is with the seal rather than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or it opens with an ease. Any competent DIYer can replace these in a matter of minutes.

Like all mechanical parts hinges are prone to wear out over time. It's very simple to change the hinges on a window but it's much simpler if you have someone to help you to hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. You can check this by looking for the arrows on each hinge. This indicates which way the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window in a particular way or due to poor installation at the factory. Sending us a picture via our website is often enough to resolve the problem. We are more than happy to give assistance.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to operate and close more easily. It can also prevent corrosion and decrease the chance of sticking. This must be done at a minimum every year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. First, the hinges due to wear and tear may become displaced, window repair which can cause gaps to develop between the sash and the frame. They can be repaired by giving them a thorough clean, however when they're beyond repair, it might be necessary to get them re-aligned or replaced. Second, the interlock can also become disaligned. This happens on the hinge side and might require to be cleaned. In some instances it might be necessary to replace the hinges.

The second most frequent cause of draughts is the window repair seals. These are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. Replacing these with high-quality weatherstripping can help keep draughts at bay. Another alternative is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and will reduce the risk of draughts.

Another method of reducing draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be put on top of your window sill. They can keep your home warm by blocking out cold air.

With a little regular maintenance and repair windows made of upvc will continue to provide excellent insulation and security for your home. It is essential to remember that all windows eventually get worn out and it is more cost-effective to replace them than to repair them. So, if you are having issues with your upvc windows, it is always recommended to seek assistance from a professional as soon as you can.