• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft with the Ghost Immobiliser. It is discreet and does not require additional key fobs.

The device uses existing buttons on your vehicle (steering wheel doors, door panels and centre console) to create a unique pin code sequence that can be up to 20 presses long. This then authorizes the vehicle to start.

Simple PIN code change process

With the growing rate of vehicle theft, many owners are seeking to improve their security. There are many types of aftermarket security devices available, from tracking systems to alarms and immobilisers. They're not all equally effective at protecting your car. While a tracking system can assist in finding your vehicle in the event of theft, it can not stop the crime from happening in the first instance. Immobilisers, however, do exactly what they say on the label - they shut down the motor vehicle of your car so that it can't be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it virtually impossible for thieves to take your vehicle.

Utilizing the buttons already in your car, the ghost device creates an unique sequence that must be entered before the engine will start. This can be done via the indicator stalk, window or heater buttons. In addition to this option, there is an app for mobile devices that can act as an emergency PIN code override, allowing the driver to operate the car without having to use the button sequence. This is an excellent option for those who want to offer your car to valet parking or for servicing. The immobiliser will stay active.

The Ghost is a unique and ingenious device that works in conjunction with the buttons in your vehicle rather than as a separate device. It's not just an effective deterrent for vehicle theft however, it can be used on future vehicles you may own. This makes it a far better investment than a traditional wheel lock.

Weatherproof small device

The Autowatch Ghost Immobiliser is an advanced security device that shields your pride & joy from key cloning and hacking. It also blocks ECU swapping. It's a weatherproof and small device that communicates directly with your vehicle's ECU over the CAN data bus to shut down the engine. It can be plugged into the vehicle without additional wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant to jamming devices, which is an approach used frequently by car thieves to circumvent existing immobilisers.

The advantage of CAN data over conventional systems is that they operate in a silent manner. It isn't detected by sophisticated RF scanning and code-grabbing technologies as well as recognized by conventional diagnostic tools. The Autowatch ghost immobiliser installers near me does not employ LED indicators and instead uses buttons on your vehicle, like the steering wheel, centre console, or door panels, to create a an unique sequence of disarming. You can make this sequence up to 20 presses long for added security. The iPhone app is limited to one connection, and comes with an individual pairing code for the Ghost. All communication between the two devices is protected.

The Ghost prevents car thieves adding an ignition key that is not in use or replacing the ECU to bypass the immobiliser. The engine will only start if a valid PIN code is entered. It can also be put in valet/service mode to allow for temporary operation (with defined parameters like a 30mph speed limit) to allow you to hand your car over to a valet service or for servicing without the need to enter a pin code.

Tested for each vehicle

The Autowatch Ghost is the world's first aftermarket immobiliser on the CAN bus that connects to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device intercepts electronic signals to block the system of your vehicle from performing its normal initialization process until you enter the passcode you have created. The system can be activated or deactivated through your smartphone's app without the need for wires.

Standard factory immobilisers in vehicles work by having a transponder inside the key that sends a signal to the ECU. If the correct code is sent the car will begin however, if the transponder is replaced by one from a different vehicle, the immobiliser won't recognize it. This allows the vehicle start and be stolen. The Ghost immobiliser has been developed by a South African company at the top of the line in vehicle security technology. It protects your pride and joy from hacking, key cloning and even key theft. Only by physically towing your car away could a thief steal it and not be able to drive the vehicle.

Ghost uses the buttons in your vehicle including the indicator stalk, steering wheel and door panels to create an unique, changeable PIN code sequence that needs to be entered before you can use your car. This is done without the need for extra hardware such as key fobs and can be up to 20 presses long. It is also inaccessible to equipment for diagnostics and does transmit radio frequency signals, meaning thieves cannot make use of sophisticated RF scanners or code grabbing technologies to detect that the system has been set up.

Ghost is more difficult to remove than car alarms that require disarming with several buttons. This makes it an excellent alternative to a GPS tracking device, which can be used to track your vehicle after it's been stolen.

Emergency PIN code override

You don't have to look too far on social media to see stories or even videos of vehicles that were stolen by thieves using the most advanced technology tools available to them. This includes key-cloning devices as well as hacking tools that allow thieves to start the car without the original keys.

The Ghost immobiliser was specifically designed to prevent this and offer an additional layer of security to protect your vehicle from being targeted by thieves. It creates an individual pin code sequence that is triggered by your buttons on the steering wheel, door panel and the centre console. This unique PIN must be entered together with your original key fob in order to stop the vehicle from getting started. The unique override pin can be located on a black card which you will receive following the installation. It is easy to remember since there aren't any LED indicators.

The device is hidden in the vehicle's wiring and doesn't emit any radio signals, which means it cannot be recognized by thieves using diagnostic software that is able to recognise what type of security system you have installed. This makes it a great alternative to the tracking device.

Unlike other security systems, that rely on a relay located in the engine bays, CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to disable the vehicle completely through an electronic block of commands for both the ECU and the engine.

They can also be linked to a separate analogue alarm immobiliser or tracker. This must be specified prior to the installation. They are also compatible with service/valet modes and is a great alternative to a tracker device when you take your car into the dealer for an electrical problem.

Service/Valet Mode

In recent years, there has seen an increase in the number of cars being stolen with the owners' keys. With easy access to key cloning equipment and door lock pick sets it is now easier than ever for thieves to steal your prized possessions. To stop this, we are now offering the Autowatch Ghost immobiliser that prevents your car from being driven even if your keys have been cloned or your vehicle was stolen.

It directly communicates with your car's ECU (Engine Control Unit), via the CAN data loop. It is completely silent, vehicle as it does not use radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device. It also protects against adding the key to a new one or replacing the ECU to get around the system, since only the correct PIN code can allow the engine to start.

The device is concealed inside your car by using buttons on the steering wheel, centre console and door panels. A unique and changeable PIN code sequence that can be as long as 20 digits has to be entered before you can start your vehicle.

This is the first aftermarket immobiliser for CAN bus to be created that will stop your car being started or driven away without a PIN code being entered before. If you are driving away with the device in motion it will display an indicator on your dashboard and flash continuously for about 300m. Entering your PIN code will turn off the anti-hijack. Your vehicle will continue to operate just as normal. If you don't enter your PIN in this moment the indicator will continue to flash and require a new PIN every time you try to start your vehicle.