• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser Installation

Add a ghost immobiliser to your vehicle to protect it from car thieves. Our TASSA certified system guards vehicles against hacking, key cloning and immobiliser bypassing.

The system is hidden inside the wiring loom in your vehicle and is inaccessible to anyone who is looking. It works by creating the pin code push sequence that is pushed through buttons already on the steering wheel doors, door cards and the central console.

No circuit cuts

A car is a prized asset that you put in many years of effort to obtain, which is why owners want to safeguard their vehicle from theft. However, traditional security devices like wheel locks and alarms can easily be snatched away or bypassed by thieves. A ghost immobiliser problems immobiliser is a highly-effective solution that operates silently and isn't easily recognized by modern day thieves.

A ghost immobiliser is a hidden device that connects to your vehicle's CAN data network to shut down the engine without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle by using buttons on the steering wheel, dash and door panels. This generates an individual pincode that is only accessible to you. The code can be changed at any point and can be as long as 20 digits long, depending on the style you prefer. It also has an emergency code that you can use in the event that you forget your PIN.

The ghost immobiliser can also be helpful to prevent the relay box inside your home from transmitting the signal of your car key, which will unlock the doors and start your vehicle. It also blocks sophisticated methods to steal your vehicle, such as OBD port hacking. The device is small, weatherproof and hard to detect. It's also very difficult to alter.

The ghost immobiliser comes with a further benefit: it can be installed in your vehicle without leaving permanent marks. It's ideal for those who plan to sell their vehicle in the near future. It's also much quicker and simpler to install than the factory-installed system.

The Autowatch Ghost, a revolutionary technology, is a new generation device that prevents thefts of cars using contactless technology by connecting to the CAN network of a vehicle and using the buttons to generate an unique PIN code. This is a stealthy system that can be installed without cutting any wires and does not require any additional key fobs. It also connects to the original ECU of the vehicle, which prevents thieves from by stealing it using a new key. This system has been verified by TASSA and is able to be linked to an International Security Register. Owners will have peace of mind, knowing that their vehicle is protected from theft.

No RF scanning

You'll want to safeguard your vehicle from theft if you have spent an enormous amount of money and time customizing it. One of the best ways to accomplish this is to install an immobiliser. This will stop your engine from starting unless you enter a unique pin code. Utilizing the buttons on your steering wheel as well as the dashboard, you can generate an up to 20 digits long which is only accessible to you, making sure that only you are able to drive your vehicle. You can also set up a valet and service mode that allows you temporarily to start your vehicle without entering the PIN code. This will permit the technician to work on your vehicle without you being present. This is a great feature for people who are looking to reduce time and make their lives simpler.

Ghost immobilisers are new generation device that connects to the vehicle's CAN data network and utilizes the buttons on the steering wheel and dashboard to program a unique PIN code. It is designed to blend into with the rest of your vehicle, since it doesn't emit any noise or LED indicator. It can be placed anywhere on your vehicle without affecting the aesthetics.

This stealthy system is TASSA approved and can cut down on your insurance costs. It has a tracking feature that allows you to locate your vehicle even if it's been stolen. This is useful if you have a rare or expensive vehicle that you have invested lots of time personalising.

The Autowatch Ghost can be used together with an iPhone application that allows you to start your car remotely in the event that you forgot your PIN or not able to enter the vehicle for some reason. This feature is great when you need to do some errands, or pick up your children, but do not want to risk having someone else drive your car. This feature is useful if you have to take your car to a mechanic for repair or service.

The Ghost is unique in that it doesn't transmit or detect radio frequencies, so it is undetectable by thieves who use RF scanning and code grabbing technologies. It also has the ability to protect your car against key cloning and ECU swapping which are the most typical methods of theft from cars.

No key cloning

Ghost immobilisers are a great option for protecting high-end vehicles and are designed to stop key copying. They prevent your vehicle from starting without a PIN code being entered along with the regular key fob. This makes it very difficult for thieves to steal the vehicle, and can discourage them from trying. This is a great idea if you've spent an enormous amount of time and money in making your vehicle unique, or own a rare or expensive model.

These immobilisers are connected to the vehicle's CAN data network and are completely hidden, which means there is no visible indication of its presence inside the vehicle. It is also difficult to identify using radio frequency scanning technology or code grabbing. This means that a thief must spend much longer in order to successfully get your vehicle.

To bypass the system, thieves need to know the unique pin code and the location of the Ghost. The pin code is unique to you and can change it as many times as you want. The pin code you select is simple to remember, but mathematically difficult for anyone else to decipher. The engineer will also provide an emergency pin code in the event that you forget the pin.

The Ghost CAN bus immobiliser is weatherproof, and can be installed in any location of your vehicle. It can be used with any vehicle and can be fully customized to match your car's style. It is also very cost-effective and simple to use. The device can be transferred to another vehicle, provided that it is compatible with the new vehicle.

The immobiliser for the CAN bus is compatible with many other security features. It is able to, for instance detect damage to the vehicle and alert the owner. It can also shut off the engine in the event that the car has been tampered with. The system can also protect your vehicle from key cloning and hacking. It also detects vibrations and contact with the vehicle. It can also notify the owner when the vehicle is moved.

No OBD port hacking

Ghost is a hidden device that is connected to the CAN data network of your vehicle. This will stop thieves from hacking in to disable your alarm, turn off your key fob and create new keys. This technology is a step up over the methods that were employed by thieves to steal vehicles in the past. The CAN data network ensures that the system won't be affected by disconnecting or replacing the battery.

The Autowatch Ghost is the first CAN bus immobiliser aftermarket in the world, guards against key-cloning, hacking and replica car theft. It works without LED indications or key fobs, instead leveraging the buttons in your steering wheel, centre console and door panels to let you create a unique PIN code sequence (up to 20 button presses) that needs to be entered first before you can drive your car away.

Modern thieves use diagnostics to detect cuts in the circuit on your vehicle. They can bypass immobilisers that require lots of wiring or are integrated into the wiring. The Ghost is weatherproof and doesn't require any additional wiring. It is not able to be detected by diagnostic tools of a professional. It can be even installed on vehicles with anti-theft equipment.

A Ghost immobiliser has another major autowatch ghost immobiliser fitting advantage: your vehicle will only be started by a person who knows your PIN code and has physical access to your vehicle. This is a big advantage over traditional security systems which can be bypassed with simple cable tampering, a screwdriver or a universal remote controller.

If you forget your PIN, you can easily reset it by using the emergency PIN override function on a mobile device or computer. This is a great option in the event that you have to start your car after it's in a garage, or the valet parking service.

The Autowatch ghost immobiliser Fitting Ghost 2 is the most recent version of the product, and is insurance approved by TASSA when installed by one of our authorized installers. It has the QR fingerprint system to identify individual parts, which allows for the return of stolen items if they are found. It can also be switched to'service mode,' which allows the engine to start when your vehicle is in a garage or with valet parking, however, you must enter your PIN code again to exit the car.