• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Double Glazed Window Repair

Double glazing is an energy efficient investment that stops heat loss in the winter months and helps keep your home cooler in the summer. Repairing your double-glazed windows whenever required is a great method to ensure they remain in good working order.

Over time, your double glazed windows can suffer from problems like condensation and misting. Double glazed windows may become difficult to open and close.

Broken Panes

A stray ball or a flying pebble from your lawnmower, or even a storm that is heavy can shatter the double panes of your windows, leaving your home exposed to the elements. While a cracked window can be difficult to repair, you don't have to have it replaced entirely. In fact the insulated glass between the two panes is in good shape and you can repair your double-pane windows with some DIY effort.

To start, you'll need to remove the broken glass from the frame. You'll need to be careful to keep glass shards from falling to the floor or falling off the frame. Use a pair of gloves to protect your hands, and window repair a rag to protect the area around the broken glass to avoid further breakage or cuts. After removing the broken glass, clean the frame of the window thoroughly, removing any sealant or other debris. It's important to sand rough areas of your frame to create an even surface for the new glazing.

Once the frame is cleaned, you can apply a fresh layer of glazing to the area in which the broken pane was removed. This is the best method to protect and seal your window. It will also reduce your energy bills by preventing drafts and water from entering the home. The next step is to choose your glazing material. Some options include clear tape, which is a bit more durable than regular tape and will help keep your window safe from further cracking, and glazing film that is similar to clear plastic wrap. This type of wrap has the advantage that it can be painted to match the frame of your window and can also shield your windows from the elements like ice and rain.

Whatever material you use it's essential to press the glaziers points into the seam where the putty meets your frame. They will help hold the glass in place, and will help it stick to the frame. Hardware stores sell glazier's ropes that you can roll out onto the frame rabbets.

Condensation

If you are experiencing issues with condensation, it is recommended to contact the window manufacturer. Many companies offer warranties and guarantees that cover these issues. Condensation and fogging between panes of glass is a clear indication that the seals between your windows are damaged and can only be repaired by an expert who will fix both panes.

It's a complicated process that requires special tools to remove and replace the window. A professional can do this job and provide the equipment. It is best to leave the task to an expert. These tools could be risky.

If you decide to undertake this yourself, ensure you wear gloves and safety glasses to protect yourself from any broken pieces of glass that might fly away during the process. It is also crucial to remove all the putty and metal glazing points from the grooves that the new window will go. You should also brush the frame with wire and vacuum or wipe it clean with a damp cloth. Once the frame is clean and dry you'll need to purchase a replacement glass that is 1/8 inch smaller in each direction than the window that you have and then fit it into the grooves.

Depending on your frames, you will then need to apply a thin layer of silicone caulk to the grooves in order to ensure that your new pane is secure in place. Once the silicone caulk has dried you can smooth it out and make any necessary adjustments. The wood molding will then be reinstalled.

Double-glazed windows can be difficult to open and close in the event of extreme weather. Extreme temperatures can cause frames of double-glazed windows to expand or shrink, causing them to become sagging and stick. You can try wiping the frames with water and then lubricating them if this is the case however, it's better to seek advice from the company who installed your windows.

Misted

Misted Double Glazing is a problem with windows that occurs when moisture gets trapped between the glass panes of double glazed windows. Double glazing consists of two panes, which are separated by a space that is filled with argon to improve thermal efficiency. This results in an airtight seal that keeps warm air inside and cold outdoor air out.

This seal can fail over time, and water can accumulate between the panes of glass and cause them to become to appear misty. This happens because the gap between the panes is heated by the sun, causing water vapour to build up within it.

This is a natural process however, if it happens between the windows' panes it could cause problems since it will no longer be able control the temperature in the room. Instead the temperature outside of the window will affect the temperature inside. Northfield Glass can help you in the event that your double-glazed windows begin to mist.

We can replace the blown sealed unit without needing to replace the entire window, which is a lot less disruptive than a total replacement. Our misty window repair involves removing the glass unit, washing it, and then replacing it with a fresh one to make a watertight seal again.

There are companies in the field which claim to drill holes in your windows with mist and inject chemicals into them which they say removes the condensation and fog but we do not recommend this procedure. This is not only unsightly, but it could cause damage to the toughened glass and can result in windows that do not fully function.

It is important to fix the issue as quickly as you can, as if untreated it can result in the growth of mould that not only damages the window, but can also pose health risks to your family. Moisture in the window can cause other problems with your property, such as damp or rot. In certain situations it might be necessary to replace the entire window.

Blown or Failed

Double-glazed windows consist of two panes of glass with an air or inert between them. This improves their thermal efficiency, keeping the cold out and heat in. Over time, Window repair the gas can become depressurised and cause many issues.

Condensation between the panes is one of the most frequent. It is not a sign of a window failing however it could indicate that you need to reseal the panes. Condensation can also be a sign of a broken double glazing, which will need to be replaced.

Double-glazed windows can also cause draughts. It could be due to a failed seal or handle that is broken, or a broken lock. A draught is noticeable and will lead to more expensive heating bills, so it is important that you get this fixed sooner rather than later. You can test the seals by feeling around the edges of the window frame to see if you feel any cold air.

You may also see water beads on the interior of windows if your window seals aren't performing as they should. This is an indication that you have to seal your double-glazed windows.

Your window frames are made to move slightly, as they need to do in order to keep the glass sheets in the right place. In time, this special packaging material could become compacted. This will cause the seal to become broken. This will allow air to flow between the panes and reduce the energy efficiency of your window.

A seal that is blown is a clear indication that your double glazing has failed and must be fixed as soon as possible. A blown seal will stop your double glazing from fulfilling its primary function which is to keep the cold out and warm air in. A blown seal could let moisture into your home, which can result in mold and other unpleasant conditions. Contact a double-glazing specialist when you notice a blowing window seal. They can repair or replace the entire unit.