• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It is easy to replace a broken window handle with the proper tools. However, it is essential to know the type of handle and its spindle's length prior buying an alternative.

Older uPVC windows have cockspur window handles which have a spur that protrudes to the lock of a wedge cockspur striker plate. They can be right or left-handed and have to be matched when replacing.

What kind of lock and handle do I need?

There are many different types of upvc window handles and locks, each with their particular advantages and uses. The type of handle you are using will determine the ease to open your windows and if the locking mechanism functions as intended. Over time and through regular use, upvc window handles may become damaged or worn out, rendering them less secure and efficient. In some instances, they may even fall off completely. If you find that your window handles have fallen off, upvc Window handle replacement it's crucial to repair them as quickly as you can. This will help prevent burglaries, and keep your house secure.

It's a task that virtually anyone can perform. With a few basic tools and the proper knowledge it's a straightforward procedure that shouldn't take less than a few minutes. To get started, you will need to determine the kind of lock and handle you have on your window made of upvc to help you to find the ideal replacement.

Inline Espagnolette Handles

They are usually found on the outside of the window. They are flat in design and have a latch that engages with the locking mechanism on the window frame when turned. Inline upvc handles also come with spindles that run through the center of the handle and then into the window frame to operate the latch.

Cockspur Handles

These handles are usually found on older uPVC window frames and feature an unusual hook-shaped design. Cockspur handles have one screw that holds the handle to the frame and are not as secure as other types of window handles.

Handles that turn and tilt

As opposed to the other handles made of upvc that are tilt and turn, these handles can both be rotated to open the window, and the handle can be tilted to the side for ventilation. In general, they have a 7mm spindle at the back of the handle and are available in left and right-handed versions.

When you are purchasing replacement window glass handles for upvc, it is important to verify the length of the spindle since not all of them are identical in size. Drop something in the middle of the hole to test the length. This is the largest spindle size that will fit your windows.

What is spindles?

uPVC window handles function similarly like doors, turning the handle to activate a latch inside the frame. This opens the window so that it can be opened and closed. But, at times, handles can be damaged, especially when they are used frequently or exposed to harsh weather conditions. It is possible to replace the handles on your uPVC window if they're not able to operate it correctly.

There are several different types of uPVC handles available comprising Espag, Cockspur and Spaded handle options. These handles are designed to fit in the uPVC frames in a variety of ways and each handle type has a particular spindle that is used to lock the mechanism fitted to the window. This is why it is important to know the type of handle you have on your uPVC window so you can get the correct replacement for it.

You can find out what kind of uPVC handle you have by inspecting the base of the handle. There should be a "snap-in' cover over one screw that holds the handle base in place. After removing this, you will be able see the second screw that holds the handle base in position. After both screws have been removed and you are able to remove the handle from the uPVC.

Once you have removed the uPVC window handle, you have to remove the spindle you have removed from the locking mechanism. Note the length of the spindle. You'll need to buy a replacement of the same length as the original handle and locking device.

The spindle wears out and is unable to operate the locking mechanism. This can be due to damage from constant use or a loosening of the locking mechanism, or even corrosion that occurs over time. If this happens, you'll need to replace both the window handle and the locking mechanism in order to restore the full functionality of your uPVC Windows.

How do I get rid of the handle from the previous one?

Window handles can become damaged or destroyed over time. It is important to repair them as quickly as you can to ensure your security. It is good to know that replacing a damaged or worn handle is a relatively simple task that can be completed in just over a minute and doesn't require any specialist tools.

The first step to remove the old handle is to remove the screw that is located on the top of the handle base. After this screw is removed, the handle can be removed from the base section. A second screw will be located at the bottom of the handle. This can also be removed. When both screws are removed, the handle can be removed completely from the base of the window.

Once the old handle is removed, grab the new handle and align the fixing holes with the holes that are currently in the window frame. If there is a cap or sticker on the new handle, remove it if needed and put the handle back in the appropriate position. Once the handle is set, it is essential to check that it works by turning the handle and ensuring that the lock mechanism activates.

Espag handles come with an elongated spindle that extends from the handle and slot into a multipoint locking mechanism in the frame of the window. Cadenza windows come with a blade with cutouts which fit into the lock mechanism. Cockspur handles are long and are hung over the frame that surrounds the window or the transom crossmember of the bar.

Once you have the new handle in place, slide the spindle into the lock inside the window and then tighten it down. Replace the snap-in cover and screw cap (if appropriate) after the handle is fixed. The handle is now ready for use to use, so try opening and closing the window several times to check that it functions correctly and securely.

How do I put in the new handle?

Changing your uPVC window handle isn't difficult, and the process is actually very simple. All you need is a screwdriver and a small amount of patience. First, make sure the handle that you are replacing is unlocked. Remove any screws visible. You can also replace them with screw caps. After the handle has been removed and you are ready to take an note of the length of the spindle which protrudes from the back of the handle. This is crucial since it will determine the type of handle that you will need to purchase.

Espagnolette handles on uPVC are the most sought-after kind of handle. They feature a spindle that is connected to the handle and acts as an internal locking mechanism within the frame of the window. The handle opens the latch, allowing the window to open. As time passes and with regular use, espagnolette handles may be damaged or destroyed which is why it is essential to find a replacement.

Cadenza handles are a type of uPVC handle that is usually used with tilt and turn windows. They feature a protruding blade that operates a multiple-point locking mechanism inside the window. They are generally more secure than handles made of espagnolette because they can only be opened from the inside. They can be replaced using the same method that you would for espagnolette handles however, make sure that the new handle is angled, not flat.

Once you have selected the correct handle, simply align the new handle to existing screw holes prior to fixing it with screws. Then, put the screws back on and make sure the new handle functions properly. This is accomplished by moving the handle from locked to the unlocked position and the reverse direction a few times. It may be worth contacting an expert to see whether you can solve any problems. They can often advise you on the best approach to solve the issue in a fast and effective manner.