• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Secures your vehicle from key cloning and stops thieves from driving your vehicle with original keys. Our latest immobiliser is connected to your vehicle's data network, CAN, and a unique PIN code must be entered for the engine to begin.

In contrast to trackers, Ghost doesn't transmit any radio frequency signals & can't be detected by diagnostic tools. It does not have any LED indicators or buttons to indicate its presence in your van or car.

Anti-key cloning

The ghost immobiliser was designed to stop key cloning and hacking. The device connects to the CAN data network in your vehicle and generates an unique pin code sequence that is activated by pressing the buttons from the factory on your dashboard and the steering wheel. This stops the thief from being able to start your car. If the incorrect PIN is entered, it will stop the engine from starting which makes it impossible for you to drive away with joy and pride.

Ghost immobilisers are new technology that is extremely difficult for thieves to beat. In contrast to physical deterrents such as wheel locks and steering locks which can be cut or Ghost 2 Immobiliser Fitting Near Me jacked The ghost immobiliser is a discreet electronic device that isn't easily detected by regular thieves since it doesn't emit any radio signals and operates in a silent manner.

The new generation of immobiliser is capable of protecting your vehicle from a variety of threats, including keys that are duplicated, key-hacking, and even relay attacks. It also stops a thief adding a key or replacing your ECU because it won't permit them to start your vehicle without entering the correct PIN.

Contrary to other immobilisers, the ghost immobiliser 2 does not require any additional key fobs or remotes in order to operate. It can be turned off through an app that is installed on the smartphone of the driver. This is ideal when you need to give your car away for valet parking or servicing without the key fobs.

The Autowatch Ghost-II represents the latest version of the Ghost's immobiliser. It is designed to be simple and user-friendly as possible, while still being as secure as is possible. This is done by integrating the Ghost-II into the vehicle's data network CAN, meaning that there aren't any additional wires that can be hidden or easily located. It also features an integrated feature that allows you to disable your Ghost-II by simply connecting to the vehicle's Bluetooth, so you can enter and drive without any hassle.

OBD port hacking

OBD port hacking is the latest method used by professional car thieves. Thieves can gain access to your vehicle's OBD using the help of a laptop, mobile application, and cables that are available online for less than PS50. Once they have access, they can do anything they like to do, from resetting your vehicle's fault codes to tuning your car, or even getting it stolen within a matter of minutes.

It can prevent your car from being taken away by requiring a unique PIN sequence to be entered along with your key fob prior to you start the engine or drive away. It communicates with the vehicle's ECU (Engine Control Unit) via the CAN Data Circuit. This is undetectable by any scanners for RF or code grabbing. It comes with a Service/Valet mode that allows your vehicle to start without the PIN code.

You will also need a cable with OBD pins, which are connected to the CAN bus. These cables are available on Amazon/Ebay for around PS50. You will also need an OBD cable that has OBD pins that connect to the CAN bus. These can be purchased on Amazon or Ebay for around PS50. The cable has to be spliced into the wiring harness of your car, like the radio wiring harness.

Once the hacker has a connection to your vehicles OBD port, they can send diagnostics requests to the system at high baud rates that can crash the CAN, and prevent systems within your vehicle from functioning. This could cause the engine to stall, doors to lock and even the brakes to activate.

No additional remotes or key fobs required.

The car immobiliser is a fantastic piece of anti-theft technology that is utilized by millions of modern cars all over the world. An aftermarket immobiliser helps protect your vehicle through the use of engine ECU software that blocks cars from starting if an untrue transponder signal is sent.

However, it can be easy for a thief to get around an immobiliser system if they have access to the code that allows them to disable it. The battery in most key fobs can be easily removed by prying it open which means that a burglar could make use of a simple tool to remove the immobiliser's inner circuit board and replace it with the blank. They'll then be able to start your vehicle.

The TASSA approved Ghost 2 is an immobiliser that doesn't require additional keys or remotes. The immobiliser communicates directly with the vehicle's ECU (Engine Control Unit). This is done through a discrete, silent data loop in the CAN which is not detected by diagnostic tools such as those used by high tech thieves. It also doesn't utilize a traditional key fob with LED indicators, so it is able to go unnoticed in plain sight.

It is possible to disable Autowatch's Ghost 2 protection at times like during valet parking or a service. ghost immobiliser for sale CAN immobilisers have a mode called "Service Mode,' which you can activate by the push of a button on your phone. The car is still operable, but the maximum speed is limited to 36 mph.

If you'd like more information about the TASSA accredited ghost immobiliser installers near me immobiliser, contact us today to arrange a demonstration at our workshop. A member of our team will run through an in-depth explanation of the system's operation and will provide you with owner manuals, installation certification, Ghost 2 emergency card and a security guarantee.

Simple Change of PIN Code

Ghost is a next-generation device that protects your vehicle without cutting wires or adding aftermarket key fobs. It is directly connected to the vehicle's CAN data network and a personal PIN code is programmed into it using buttons on your steering wheel and the dash. The device doesn't emit RF signals, which means it is not able to be tampered with. This makes it unrecognisable by sophisticated scans using RF or code-grabbing technologies that modern thieves use.

The PIN code sequence can be changed whenever you want to lock out previous drivers and even includes an override option in the event of lost sequences. When installing, the installer will demonstrate how to accomplish this. The system comes with a valet-mode feature that can be used to temporarily disable pin input sequences so that the garage or mechanic can service the vehicle without knowing the code. This is a great choice for customers who don't want their pin number to be revealed but still wish to leave their car with valet parking or service.

In contrast to Thatcham products which require additional key fobs to operate, Ghost is a discreet system which takes advantage of the buttons in your vehicle to create a unique and interchangeable PIN code sequence. This sequence is entered through the app on your smartphone, which means there are no additional LEDs displayed and your vehicle is protected with no risk of being blocked by hackers or other technology.

Every vehicle is tested

Unlike key fobs that require you to press buttons on them the ghost immobiliser near me immobiliser is discretely placed under your steering wheel or dash to make sure you are unaware it's there. The device is connected to your car's CAN data networks and an individual PIN code is programmed by using the buttons already on your vehicle. The system will not allow your car to start until the code is entered. This means that thieves can't duplicate your keys or gain access to the OBD port to gain access to your vehicle.

Ghost can be utilized in all vehicles including electric cars motorhomes, vans, motorhomes and bikes. It's also extremely versatile and can be programmed to turn off in various situations. For instance, it can be set to enter Valet mode when the vehicle is taken to a valet park or a service provider. This means that your vehicle can be operated within a set 30mph speed limit, and the ghost 2 immobiliser fitting near me (lange-yildiz.blogbright.net link for more info) immobiliser will reactivate itself when it returns to your possession.

Another great feature is that the device can be reset to the personalized PIN code at any time. This is beneficial in the event that you forget your code or the device ceases to function and is just as good as new.

The device is unnoticed by anyone who doesn't know about it is. This is because it runs through the buttons that are already on your car's dashboard and steering wheel and utilizes the information they send to determine the buttons that have been activated. This makes it a completely secure and reliable security option that can't be tampered with by jamming, RF scanning, or door lock pick sets.