• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to decay or rust as aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and even be fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good repair.

For single pane windows it is fairly easy to replace them, and the new window is usually able to fit into the frame that was previously installed easily. If you have double glazed window repairs-paned windows which are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you're planning to try to remove the window panes yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. It is also an excellent idea to lay down a dropcloth before you start working on the glass to ensure that any shards will fall onto the fabric instead of onto the floor where they could be trodden under and cause further damage.

It's a great idea to seal the gap after the glass is removed. This will stop water and drafts from entering your home until a professional is able to fix the window. This will also act as a barrier that will prevent any intruders to gain access into your home. If the gap between the window repairs near me and the door is large, you might prefer an alarm system that has an opening. This will provide the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can develop a number of problems, including sliding. A sagging uPVC windows can cause issues with light, draughts, and even security. If you find that your upvc window repair window is beginning to shrink, it's crucial to act fast to prevent the problem from getting worse.

Repositioning the hinges can help fix a window that is sliding. You'll first need to open the windows to get at the frame. Then, using a screwdriver, you can remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've moved your hinges. If you are happy with the fit of the window, tighten the screws to keep them in place.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loosen. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and draught-proof.

uPVC handles could also loosen. This is often caused by screws that have become undone over time, but it could also be due to the handle mechanism wearing out. It's fairly simple to repair a loose uPVC handle. You'll first need to close the window and then perform a test fitting. The corners of the sash must be aligned with the casing joint. If it doesn't you can use a screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains it's crucial to take action. Windows that leak water do can not only cause destruction of your home's structure but also hamper your efforts to control the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is an easy fix that can be completed by any DIYer who is competent. Depending on how severe the issue is, old caulking may have to be removed. It is essential to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk and then make the area harder to clean and reduce your energy efficiency.

Check that any drainage holes have no debris in them and that the sill pan has been properly angled to drain away from the window. In more serious cases, you may need to replace the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to remember that if the leakage originates from the glass of your double-glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open with ease it could be hinges that are at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical component, hinges can be damaged over time. It is an easy process, but it's easier to do when you have a person to assist in holding the frame in place.

Check that the uPVC hinges open and close in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue can be caused either due to opening the window in the wrong way or due to a poor installation in the factory. Sending us a photo through our website can often resolve the problem. We are more than happy to offer suggestions.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also reduce the chance of windows sticking and help prevent corrosion. The ideal time to do this once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few different factors. The hinges, also because of wear and tear, can become misaligned, this will cause gaps to develop where the sash joins the frame. They can be repaired by giving them a good clean, but if they are beyond repair it may be necessary to have them realigned or replaced. Secondly the interlock, this is located on the hinge side of the window, may also become misaligned, upvc window repair again it's feasible to give them a good clean, but in certain cases, it may be necessary to have them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures, and also lessen the possibility of draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler that can be placed over your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

With a little regular maintenance and repair your windows made of upvc will provide excellent insulation and security for your home. However, it is important to recognize that all windows have a lifespan and there may come an point at which it is more cost-effective to replace them rather than fix them. So, if you are experiencing problems with your upvc windows, it is best to seek professional assistance as soon as possible.