• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing the Right Window Handle For Your UPVC Window

The proper window handle is vital for a properly installed uPVC. You'll need a style which is not only practical, but also complements the design of your home.

It is easy to change a uPVC handle. All you need is the tools listed below and only a couple of minutes of your time.

Metal

Metal window handles are both a decorative item and an essential hardware item to improve the security of your home. A range of metal window handles are available, suited to different frames and materials. Some of these handles are made specifically for sash window to make closing and opening the window more convenient and less likely to jam. There are several locks made of metal that stop the window from opening beyond an arbitrary point.

The most commonly used type of window handle that is used on UPVC is the epag handle. They feature a mental spindle in the back, which is connected to the frame of the window and controls the window mechanism. They are found on both UPVC and aluminium windows.

Cockspur handles are typically found on older UPVC window frames. They can be more difficult than modern Espag door handles since they employ a traditional peg-locking mechanism.

Cam handles are available for a sleeker look. They have a slender edge and are made to work with different types of uPVC window. They are suitable for tilt and turn windows where it is possible to open the window from the bottom while allowing the top of the window to be opened.

When selecting new window handles, it is crucial to take into consideration a variety of factors that include the height of the step and the direction that the handle can be turned. The former refers to the distance between the underside of the handle nose and the bottom of the screw plate while the latter refers to the direction in which the handle is going to be able to rotate. Some handles are able to rotate in one direction, for example clockwise. Other handles can only rotate in the opposite direction.

Plastic

There are a variety of window handles made of plastic. They are all designed to operate windows and protect them from unwanted intruders. They can be installed on either uPVC or aluminium windows, and are available in a variety designs and colors. Some of them are designed with a lock that is built-in. This provides additional security and allows you to leave the window open while being secure from intruders.

Different situations can trigger window handle problems. Sometimes, they might not be able to rotate properly. This could be due to dust entering the mechanism, which causes dirt or blocking. A common problem is when the window handle begins to move in a tight manner. This is a sign the window handle is in need of attention.

If this happens, it's important to call a specialist. They can assist you in resolving the issue swiftly and efficiently. They can also offer advice on replacing the plastic window handle with an alternative that will work better and more reliably.

Most manufacturers will make use of the same fasteners, no matter what type handle you have. This means it's simple to replace your window handle and lock using a exact match.

It's crucial to understand the size and design of your existing window before you begin looking for the replacement handle. This will ensure that you purchase a handle that fits perfectly and won't cause any problems with your current windows. Be aware of the size of the spindle - it's the distance the handle extends its nose from the base. This can be a vital factor if you want to make use of your new window handle with a restrictor fitted.

Casement

Casement windows hinge on top and bottom like awning windows. However, they open horizontally to the left or the right, instead of vertically. They're also less messy and offer a stunning view of your yard or garden, while also allowing fresh air in. They're a popular choice for new construction and also be a great addition to the architectural appeal of older homes. However, as time passes, they may become difficult to open or close because of wear-out of the hardware or worn gears. In some instances window specialists may need to replace the crank mechanism.

Casement windows, also known as awning windows, typically have a roto-gear and crank system that allows the window to open and close however, they also have an locking mechanism that keeps the sash in place when closed. The window lock on a casement works in tandem with the bezel locks on the frame to seal the window. Unfortunately, many people overtighten the handle on the casement window. This can cause the locking mechanisms to work against one other, causing the windows to be bind, and not open or close properly.

It is also normal for the handle of the window crank to get worn out over time. This can occur when the window is shut and opened repeatedly over a long time. It could be a problem if the window was used as a prop when it was closed and causing the handle to hit and damage the crank shaft or gears.

Replacing a casement or an awning window crank is a simple DIY window repair. It could save you money over the course of time. The first thing you'll need find the trim mounting screws that keep the casement cover in place (Photo 3). Once you've unscrewed the screws, you'll be able to remove the old handle and inspect the inside of the crank mechanism. Gears can be relubricated but if they are already damaged, you might have to replace them.

Cockspur

Cockspur handles are usually found on older uPVC windows and doors, as well as timber and aluminum. They lock using a key, easy to operate and provide an effective shield against cold and noise from the outside. The handle opens outwards when you pull the lever. The cockspur nose closes over the wedge striker within the frame, sealing the window. Replacing both the handle and cockspur wedge striker will make your double glazed window handles glazed windows significantly more efficient, and also increase security.

The replacement cockspur window handles are available in left and right hand models and operate by turning them 90 degrees. The sliding bifold door handles handles (lund-hudson.technetbloggers.De) are fitted with a small spur that presses against the PVC wedge of the window frame in order to ensure a secure closing. The handles are easy to install and come in various styles including satin chrome, white, and PVD gold.

Measuring the backset of a cockspur handle can be a challenge, particularly when you're replacing an existing handle. This handle has been designed to solve this problem and has 3 packers of different thicknesses that can be positioned on the underside of the handle nose to achieve a range of backset step heights including 9mm 13mm, 17mm, and 21mm.

The Schlosser Technik Apto is a top quality replacement cockspur handle which can be used in a variety of applications from 9mm to 21mm and comes with flexible screw fixing centres. It is also key locking simple and easy to fit, available in a range of finishes. It is available with left and right hand variations.

This handle is suitable for tilt and turn windows, but it will not work with a side-opening casement window (these have a separate tilt and pivot). This handle can be used to replace damaged or worn out handles on uPVC and aluminium frames by using rivets instead of screws. This handle can be attached to the window frame using the use of a rivet gun.

Espagnolette

Espagnolette window handles, also referred to as shootbolts or espagnolette locks, are the locking mechanism that connects to the multi-point lock system in your uPVC windows. These are common in older homes and offer both aesthetics as well as security. Espagnolette handles can be key-locking as well as non-key-locking. They are available in both inline and cranked designs. They can also be a straight or curved style. The key-locking feature adds an additional layer of security by preventing the handle from being opened from the outside using a thin screwdriver stuck between the frames. This is a typical burglary technique!

There is a huge variety of espagnolette handles you can pick from at GB DIY Store. It is crucial to measure the spindle size of your current espag handle before making a purchase for a replacement. Once you have done this, browse through our selection of replacement espag handles to find the best design for your windows.

We stock a fantastic selection of white uPVC inline espagnolette handles that come in both key-locking and non-key-locking options. They come in various colours and spindle lengths to ensure you can match your new handles to your existing window frame and décor. Our espagnolette handle collection features modern and contemporary styles, as traditional designs, and each replacement handle comes with 5 different magnetic spindle lengths between 15mm and 55mm, which means you can easily attach the handle to your window without the need to purchase an exact size screw!

A clever rosette on the back of the rose ensures the spindle fits in the correct spot and can only be operated with the right-hand or left-hand lever, avoiding any mishaps. A metal spindle is also used to secure the handle of an espagnolette. The handle is secured by an innovative mechanism called a click-fit which is activated by rotating the handle with a finger and revealing an audible "click".