• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing uPVC Replacement Window Handles

Almost all customers agree that these upvc replacement window handles are easy to install and feel like high-quality. It is important to be aware that the handle you choose for your window must be suitable.

The key factor is the step height, which refers to the gap beneath the handle's nose to the base or frame. Other factors to consider are lockable styles and mechanisms.

Replacement parts

There is a variety of replacement window handles made of upvc available to buy. There are numerous styles and colors to choose from, so you're bound to find something that is compatible with your existing windows. It's easy to buy something on impulse especially when the handle is damaged. Therefore, it is best to check a few things before purchasing the replacement. The first thing to think about is what kind of upvc handle do you have now and what the difference between the types is. The table below lists the most common handles so that you can select the best one to match your window.

The majority of double-glazed windows have epag handles. They are usually attached to the frame with two screws that are screwed in from both above and below.

The spindle bar in the back may be of different in size, and will determine if they're left-handed or right-handed. It is essential to know the measurements of the handle you have to ensure that you get the appropriate replacement.

Usually fixed with two bolts much like the Espag handle but they are positioned low from the frame which means that the handle won't poke through your blinds. This is a great choice if you want the handle to blend with your blinds and windows made of upvc.

Cockspur handles are similar to Espag handles, however they have a nose which closes over a wedge that sits on the frame of the window. This type of handle is often found on older upvc windows and also on some wooden windows.

On casement windows, tilt and turn handles can be operated by either turning the handle or pressing the top of the window. This opens the window from the inside and allows you to clean outside without needing to step to the ladder or step over the garden fence. These are ideal for those who have limited mobility, and can increase security and accessibility in the home.

Tips and hints

There are many different types of uPVC window handles, and lots of people will need to replace them at some moment. When this occurs it's best to know a few tips and tricks that will assist in making the task go as smoothly as it can.

Check what type of handle is at your home. Depending on the type of handle is attached to and which locking mechanism it uses, it may be necessary to replace the entire handle and lock. For instance, if shoot bolts (espag) and roller cams are jammed or seizing and sizing, you'll have to replace them as well as the handle itself.

Thankfully, most uPVC handles are very similar and follow industry standard size, which makes replacing them a fairly simple task. The first step is to remove the screws from the handles, usually pozi-drive screws. Once they are removed, you can then take the handle apart.

If you've got the handle split from the handle, it's recommended to make note of how much of the spindle extends from the base of the handle. This will allow you to measure the spindle length for an alternative handle. To do this, measure the amount of the square peg that sticks out from the top of the handle, and use this as a reference.

This is particularly important for inline uPVC window handles since they are always straight and will only open left or right, and won't operate in the middle. If you're not sure what kind of handle you have in your home, it could be beneficial to get a handle from a neighbour's home and observe how it functions to get an idea.

You can also determine the handedness of a uPVC window by watching the way the handle turns when it is used. Handles that are hand-operated will turn clockwise or counter-clockwise. If you're unsure then you can always ask someone else to open the window with the handle, and figure out how it operates in that way.

Find the spindle's measurement.

It isn't easy to select the appropriate replacement handle for your window since different handles do not have the same dimensions. It is crucial to accurately measure the spindle when fitting the new handle. This will ensure that the handle fits. There are a variety of types of uPVC window handles, and they work in different ways, so it is vital that you know what type of handle you have and the type of locking system you have.

The spindle of the handle extends out from the handle's rear, and is connected to the lock gearbox within the window frame. When you turn the handle, it turns the lock inside the gearbox and opens the window. They are usually utilized on uPVC casement windows. They can be locked with keys to offer additional security.

Cockspur handles are usually found in older double glazing replacement windows-glazed uPVC window frames. They have an "nose" that closes over a wedge-shaped striker block. They are also easy to use and can be locked with keys. These handles can be a little more difficult to find replacements for since they are not as common as the handles that have a swivel.

If you own a tilt-and-turn uPVC and you need a replacement handle with an alternative locking system. The handle will tilt the window and allow it to be rotated back and forth in order to fully open it. You must choose the handle with a spindle of at least 55mm to be able to reach the window frame.

You can follow the same procedure to take off and replace this kind of uPVC handle, however you will need to be cautious when you remove the old one. You may have to open the window a bit larger than normal to ensure you get to both screws fixing it to the frame. After you have installed your new uPVC handle and ensured that it is in the correct position, you are able to tighten the screw covers and test the lock to confirm that it functions correctly.

Install the new handle

Once you have the correct replacement handle, it will simply screw into place. It will require a screwdriver, and an electric one might be easier. When screwing, it is crucial not to over tighten the screws, as this can cause the handle to crack or warp.

Inserting the spindle is a second crucial step to install the new handle. It is the part that runs through the handle and is responsible for operating the locking mechanism inside the window replacement companies. It is crucial that the component is properly fitted to allow the window to be opened and closed securely.

There are a variety of types of uPVC handles. These include:

Espagnolette Handles are inline handles that can be used to open tilt windows and turn them.

Cranked Espagnolette Handles: These are similar to inline handles but have a curvaceous shape that is useful for difficult-to-reach windows.

Tilt and turn handles - these are used on tilt and turn windows to control the opening and closing mechanisms.

The majority of uPVC window frames come with these. They are often referred to as 'Bay Windows in the UK.

It can be very frustrating when your uPVC handle breaks. There is no need to replace the entire uPVC window because of a damaged window handle. There are a few simple steps you can follow to fix or replace a damaged uPVC handle.

You can repair your broken window handle quickly by identifying the model and measuring the spindle. It is important to be patient and prioritize safety when working with windows or tools, but this is a simple task. It could be the difference between having a safe and secure home, or a window that can be easily opened. If you have any concerns or want to talk to a specialist about replacing your window handle, contact Bridgewater glass for window replacement window replacements [click here now]. We have a team of highly experienced and knowledgeable professionals who are able to assist you with any problems you might be experiencing.