• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet come and go whenever they want without having to let them in or out. They can also help prevent your cat from toileting in the house.

Installing a cat flap into a door panel made of Upvc is much simpler than installing one in glass doors, however it will require some expertise and the proper tools.

Take a measurement of the door

fitting a cat flap in a upvc door a cat door in the front door is difficult however, provided that the cat flap is the appropriate one and you follow the guidelines you can make it less difficult. We will be showing you how to draw the shape, use an jigsaw for cutting out the door's opening and then finish off the job by securing the cat flap to the door. This will ensure that the flap remains in place and protects the door from rain and wind causing damage.

The first step is determine the width of your pet in order to get a precise measurement of the size of cat flap you'll need. This will enable you to choose a cat flap that is large enough for your pet to enter the home and exit without needing to open the door every time.

Once you have the measurements you can determine the area on the door where the template should be positioned, usually, this is done using an X, but some kits include drawings that show where to drill. If you have one, then attach it to the door and use a pencil to draw around the door. If your door has moulding or a sill at the bottom, be sure that you leave enough space between your cat and the moulding or sill.

Then put on your eye protection as well as a dust mask, and using a jigsaw start cutting along the line you penciled in, but don't press the blade too hard as this will cause it to cut faster than you want it to. If you have a square that you have cut, make use of it to verify that you are cutting correctly and also to ensure that the hole is in a rectangular shape. Once you are satisfied with the shape, you can begin to remove the rest of the door material.

Draw a Line

The cat flap is a great method to allow your pet to go in and out without having to worry about them being a nuisance to visitors or leaving unwelcome gifts in the house. It also helps prevent draughts and helps to keep your home's temperature stable. Fitting a cat flap to your door might seem difficult for those who haven't attempted it before. A lot of people will hire a professional joiner or carpenter to do the job. While this is definitely an option, it's possible to complete the task yourself if you own the proper tools and follow instructions with care.

While this is far simpler when using a timber door it is still possible in uPVC doors - although you need to be very careful to avoid damaging the doors with cat flap as this will invalidate your warranty. The first step is to examine the door's measurements to ensure that it can accommodate the new cat-flap. If you have an ordinary uPVC panel it should be a breeze. However in the case of composite or another type of door, you may need to be more careful.

The next step is to determine the height of your cat's stomach. This is the amount of height between the floor and the bottom of your cat's stomach. You'll need to locate a space on the door that allows your cat to pass through comfortably. Once you have this information then you need to mark out the area with a pencil and a spirit level so that you can be sure that the hole you create will fit your Cat flap bifold doors.

After you have marked the area, it's time to cut out the hole. You will require a jigsaw and it is important that you take your time to ensure that the cuts are smooth and clean, rather than rough and uneven, as it could cause damage to your door. You should also remember to wear safety glasses and a dust-proof mask whenever using the jigsaw, since dust from the saw could be hazardous to your health. After you've finished the cutting, you will have to smooth the edges of the hole using sandpaper so that your cat flap will fit easily.

Cut a Hole

Getting a cat flap fitted to an existing door panel or double glazing cat flap glazing sealed unit can be difficult. You might be tempted to tackle the task yourself, but unless have expertise in DIY, it's recommended to hire a professional to do the job for you. A faulty job can not only be ugly, but also pose a security threat. It could let cold air to enter when the cat is outside and hot air to escape when the cat is inside.

The hole's location should be marked on the door with the help of a pencil and a spirit level. This will ensure it is properly positioned and runs flush with the door's other parts. It is important to have some sandpaper on ready to smooth any edges.

Wear any safety equipment you'll need to use an electric tool. If you are worried about the noise of a jigsaw you can buy a cordless version which is quieter and more user-friendly to use.

It is essential to only remove the material that is required to fit the cat flap fitters near me flap. A little bit of extra material will be needed to cover the thickness of the wall of the flap but removing more than this can cause problems or cause damage to the door frame.

A upvc door may have a metal frame or panel which could block the microchip cat flap and in this case you'll need to cut an oversize hole so that the metal doesn't get in contact with the the cat flap, if this is the case, it is crucial to fill in the oversize gap and seal it with water.

If you want to install a cat flap into a upvc or double-glazed window with metal frames it is necessary to speak with a specialist. They will offer you a brand new piece of glass that has the hole that is already designed for the cat flap. It will be much cheaper to have this done instead of trying to install a cat flap into an existing pane of glass that hasn't been designed specifically for the purpose.

Place the Flap

Cat flaps give your pet the freedom to go and come whenever they want, allowing them to relax in the house when they want to. If you've got a uPVC door, it may be difficult to install an animal flap, especially when you don't have glass panes that can be cut to fit one. If you are willing to install a half-glazed uPVC replacement panel, it is possible to add the cat flap. It's not just a matter of cutting holes in the door. It is also necessary to take a few steps to ensure that the door is safe.

A composite, uPVC or GRP door panel is generally made up of a plastic skin that is attached to an insulating polystyrene core. It is important to be cautious when cutting the material. This type door comes with a template that can be used to cut the hole.

Once you've marked the opening in your front door, it is time to put in the cat flap. You can purchase and install a wide variety of different models including basic button operated ones to microchip-activated ones that only let in your pet. No matter which type of cat flaps you choose it is essential that your cat is able to utilize the flap with ease without getting stuck outside in the rain.

A circular fitting is better than a square because circles can be cut more securely into the glass. It's because square holes are more likely to break the glass when they are drilled. This is also a safer option, as you won't have to drill into the toughened glass which could break and hurt your pet or your family members. This is particularly important if you have a child or elderly person at home who could be injured by shards glass.