• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Repairs

Window repairs can save homeowners money and keep their homes comfortable. In the event of major damages such as broken glass or a damaged frame, a window replacement could be required.

But many other issues can be fixed to prolong the lifespan of your windows. Some common issues include:

Broken or cracked panes

Cracked windows can be caused by a lawnmowers that throws rocks at the wrong time or a tree branch being blown by strong winds. This is not only visually bad, but it can result in higher energy bills because the broken pieces let cold air into your house. Luckily, it's usually relatively easy to repair windows that have damaged panes.

Start by carefully removing the glass with gloves and safety glasses. You may have to use an utility knife to remove old glazing compound or putty around the frame's edges. Then, clean the glass's surface and the frame's wood using a soft cloth or paper towel.

Once the frame is clean and dry, apply a waterproof silicone caulking around the perimeter of the frame. This will prevent water from getting into the frame through the crack and cause further damage.

A bad crack in double-paned glass can cause gas to leak between the panes, which can make your windows less efficient in insulating. If the crack is severe enough that it is threatening the structural integrity of the window or the pane inside is not there, you may need to consult a professional.

Thermal stress cracks can also happen when there's a dramatic difference in temperatures between the outside and inside of your home, which causes the glass to expand or contract. If the cracks are located on two sides of a window, it is best to replace it rather than try to repair it.

Clear tape can be used to close cracks in windows that are not yet ready to be replaced. It will also keep out cold and bugs. You can cut a nylon stocking large enough to cover the entire crack and glue it with duct tape. This is not an end-to-end fix, but it will keep cold air out and insects away from your home. If your windows are old and you're beginning to see cracks in the glass It's a good idea to check with your local window manufacturer regarding whether replacing the entire window would be a better solution for you.

Rotten Wood

Wood rot is a frequent problem with windows. It can alter the appearance of a house and can also be danger to your safety. However, it is possible to fix rotted wood. You will first need to identify the cause of the wood's rot. This can be accomplished by looking for roof leaks or gutters that are not functioning cracking caulking, and any other areas which allow water to penetrate the wood.

Next, you will need to get rid of any rotten areas of the window repair near me frame. This can be accomplished with either a chisel, a rasp or claw hammer. After removing the rotten wood, you'll have to replace it with new wood. It is recommended to choose treated wood for this project since it is resistant to rot. If you are unable to replace the timber that has rotted, you can use filler and wood hardener to strengthen the damaged area. Most hardware stores will have this type of product. To get the best results, follow the directions on the label.

After you have repaired the damaged areas of the window sill, it's essential to safeguard the area. Apply a water-resistant sealant to the wood. Sikkens for instance is a fantastic product to apply.

It is also possible to use an epoxy filler with two parts to shield the wood from further damage. It is easy to apply and leaves a nice finish. It is crucial to follow the instructions on the label. Once the epoxy filler is dry, you can sand the wood's surface. Start with a rough sandpaper, and then move on to a smoother grade.

You do not want to expose the rotted part to more moisture. It is therefore an ideal idea to cover the area that has been repaired with an oil-based primer which will protect it from moisture. After that, you can apply the wood sealant, which is waterproof.

It won't open

A window that won't open can be caused by many factors. Wood frames can warp during humid weather, the house could have settled or someone could have nailed it shut to protect themselves. However, with a little patience and the right tools, many windows that are stuck can be opened.

The accumulation of gunk or debris could be the main cause of a window not opening. Acme Glass notes that dirt and grime build up over time on hinges, sliding tracks and locks. Metal hardware can also rust if it comes in contact with humidity and direct sunlight. Spraying grease on these areas will help to prevent oxidation and keep your windows functioning properly.

The pulleys that raise or lower the window may become loose, or even break. These components can be weakened and obstructed when they are placed higher than two floors above the surface.

If you are having difficulty opening a door, use a pry-bar to gently open the door. Put a piece of wood on the frame to give the pry bar more leverage, and be careful not to scratch the window or the wood. Try using a hairdryer to dry the frame's edges for a few minutes. This will warm the wood and make it easier to move.

A faulty spring can also be the cause of a window that won't lift or lower. Depending on the manufacturer of your windows, you will be required to refer to the manual of your owner for additional instructions.

If you've tried cleaning and lubricating the moving parts on your windows, but they still won’t open, then it's probably time to replace them. Homespire Windows & Doors provides windows that are energy efficient. Don't let the windows in your home become functional to useless. A window that isn’t properly shut could expose your home to water damage and burglary. Contact us for more information about our replacement windows and services today!